INDEL INFO-4KP-94161B Positioning Plate

High-Precision Positioning: Capable of providing high-precision position information at the millimeter or sub-millimeter level, ensuring the accuracy of position control during the operation of machines or equipment.

Fast Response: Features rapid response performance, enabling real-time tracking and response to position changes. It is suitable for high-speed motion and control scenarios with strict requirements for response speed.

High Reliability: Adopts high-quality electronic components and manufacturing processes, ensuring long-term stable operation and adapting to various challenges in industrial environments.

Multiple Communication Interfaces: Equipped with various communication interfaces, allowing connection and communication with other devices to achieve remote control and data transmission, facilitating integration with other systems.

Power Supply Voltage: DC 24V.

Operating Temperature Range: -20°C to +70°C.

Protection Level: IP65, suitable for harsh environments.

Communication Ports: Usually 1 Ethernet port and 1 CAN port.

Data Transmission Rate: Up to 1Mbps.

Dimensions: Approximately 100mm×85mm×44mm.

Weight: Approximately 0.5kg.

I/O Channels: 4 I/O channels, allowing flexible configuration of inputs and outputs.

Reduced Positioning Accuracy: May be caused by sensor interference, changes in installation position, or improper parameter settings. Check if the sensor is firmly installed, whether there is strong electromagnetic interference around, re-calibrate the sensor, and inspect and adjust relevant parameter settings.

Communication Failure: If unable to communicate normally with other devices, it may be due to damaged communication cables, incorrect communication protocol settings, or interface failures. Check if the communication cables are intact, confirm that parameters such as communication protocols and baud rates are consistent, and replace the communication interface module if necessary.

Power Failure: Manifested as no power supply response from the device, possibly caused by abnormal power input or damage to the internal power circuit. Check if the power input is within the specified range and whether the power cord is well-connected. If the internal power circuit fails, contact professional personnel for maintenance or component replacement.

Slow Response: May be due to overheating of the chip, excessive load, or the need to optimize algorithm parameters. Check the heat dissipation of the device, ensure good ventilation in the installation environment, reduce the load, or re-optimize the algorithm-related parameter settings.