PFSK152 3BSE018877R2 Signal Processor Module

Function Signal Processing: It can process both analog and digital signals, and perform operations such as filtering, amplification, and conversion to meet the requirements of complex control systems for signal processing. For example, on an industrial production line, it amplifies and filters the weak analog signals detected by sensors, removes interference, and then transmits them to the control system. Digital Input and Output: It provides 16 digital output points. The output type is transistor, and the isolation method is mechanical insulation. The response time is less than 10 ms. The rated output voltage is AC220V/DC24V, and the rated output current is 5A per point. It can be used to control external devices such as actuators and alarms; it can also monitor digital signals, such as the status of switches. Analog Input and Output: There are 4 analog input points with a resolution of 12 bits, and the specifications are 4 - 20mA or 0 - 10V. It can collect analog signals, such as the signals from sensors for temperature, pressure, flow rate, etc.; and it can output analog signals as required to control the corresponding actuators. Communication Function: It supports a variety of communication protocols and interfaces, such as Modbus RTU, HART protocol, etc., which is convenient for communication with other devices, enabling data sharing and system integration. It also has functions such as data collection and monitoring, remote control, fault diagnosis, as well as data processing and analysis, which helps to improve the operation efficiency and reliability of the system.

Design Features: Modular Design: Adopting a modular structure, it is easy to install and maintain. It supports installation in the control room and can be conveniently integrated into existing control systems. It can be flexibly combined with other ABB modules to build a complete automation system. Small Size and Light Weight: It has integrity and mobility. The size is 102mm×119mm×45mm, and the weight is approximately 0.5kg. With its small size and light weight, it is suitable for various industrial environments and is convenient for installation and use under different spatial conditions. Industrial-grade Design: It can operate reliably in harsh industrial environments, has high anti-interference ability, and can adapt to the working temperature range from -10°C to 50°C. The protection level is IP20, which can effectively resist a certain degree of dust and foreign object intrusion. Strong Signal Processing Ability: As a signal concentrator board, it can connect multiple signal sources, such as sensors and actuators, etc. It can centrally process various types of signals, process both analog and digital signals, perform operations such as filtering, amplification, and conversion, and has a high signal conversion accuracy. Excellent Compatibility and Expandability: It can seamlessly connect with other ABB devices and systems, support a variety of communication protocols and interfaces, such as Modbus RTU, HART protocol, etc., which is convenient for users to carry out system integration and expansion, and achieve data sharing and functional complementarity.

Technical Parameters: Digital Output Number of Points: 16 Output Type: Transistor Isolation Method: Mechanical Insulation Response Time: Less than 10 ms Output Voltage Range: AC5 - 250V/DC5 - 30V Rated Output Voltage: AC220V/DC24V Rated Output Current: 5A per point Analog Input Number of Points: 4 Resolution: 12 bits Specifications: 4 - 20mA or 0 - 10V Other Parameters Size: 102mm×119mm×45mm Weight: 0.5kg Operating Voltage: 24V DC Filter: Selectable between 4Hz or 10kHz by jumper, and selectable between 4Hz or 10kHz by software Calibration: Configurable and scannable by software. It has a manually rotatable potentiometer for single-point offset calibration, internal one-point offset calibration by software, external two-point offset and gain calibration by software, and onboard calibration constant storage in EEPROM. Scanning Speed: 333kS/s (continuous channels), 333kS/s (discontinuous and repeated channels, random scanning) CJC Scanning: M TEMP (not scannable) or D TEMP (direct channel), M TEMP, CJ TEMP (scannable)

Applications Power System: It is widely used in power transmission and distribution systems, such as power plants, substations, power grids, etc., for processing and monitoring various power signals to ensure the stable operation of the power system. For example, it monitors analog signals such as voltage and current in the power system, as well as digital signals such as the status of switches. Through signal processing and analysis, it can promptly detect potential fault hazards and take corresponding measures. Industrial Automation: It can be used for the automation control of industrial production lines, such as the control of robots in the manufacturing industry and the monitoring of the production process. It collects various signals from field devices, processes them, and then controls the actuators to achieve the automation and intelligence of the production process, improving production efficiency and product quality. Building Automation: In intelligent buildings, it is used for monitoring and controlling various devices, such as air conditioning systems, lighting systems, elevator systems, etc. By processing the environmental parameter signals collected by sensors, it automatically adjusts the operating status of the devices to achieve energy conservation, emission reduction, and a comfortable building environment. Other Fields: It can also be applied to the automation control systems of industries such as petrochemicals, water treatment, metallurgy, textiles, food and beverages, etc., to meet the needs of different industries for signal processing and device control. For example, it monitors parameters such as temperature and pressure in the chemical process in the petrochemical industry; and controls the operation of devices such as water pumps and valves in the water treatment system.