Multifunctional process detector

【 Product function 】

1, divided into the upper and lower display screens. The upper part of the screen is used to display voltage, current (loop powered), millivolts, resistance and on-off tests of the isolation module. The lower part of the screen can display the measured and output voltage, current, frequency, ohms, and thermal resistance (RTD) and thermocouple (TC) in the form of temperature.

2, due to the use of isolated loop power supply, only one DY-RX can complete the calibration of a variety of two-wire transmitters.

3, thermocouple (TC) measurement provides cold end compensation.

4, customize the output range, to facilitate the call of different application values.

5, manual step, automatic step, step and slope output.

List of output and measurement functions

Functional measurement output remarks

Dc voltage 0 ~ 60V (upper panel ±30V) 0 ~ 10V 2-channel measurement

Dc current 0 ~ 24mA (upper screen ±24mA) 0 ~ 24mA 2-channel measurement

Frequency 1.000Hz ~ 99.999kHz 0.20Hz ~ 20.000kHz

Resistance 0 to 3200Ω 10 to 3200Ω 2 way measurement

Dc millivolt -10mV~120mV -10mV~120mV 2 way measurement

Thermal resistance Pt100, Pt1000, Cu50, Cu100 Pt100, Pt1000, Cu50, Cu100

Thermocouple E, J, K, T, B, R, S, N E, J, K, T, B, R, S, N

Other isolated loop power supply, step output, slope output, step output, custom range

【 Technical index 】

Unless otherwise stated, all indicators are based on a one-year calibration cycle and are suitable for a temperature range of +18 ° C to +28 ° C. All indicators assume a 10-minute boot warm-up time.