High Hardness Alloy Material for Surfacing Flux-cored Wire

Abrasion-Resistant Flux Core Wire:

Our flux core welding wire, available in diameters of 2.8 mm, 3.2 mm, or 4.0 mm, is packed in drums ranging from 100 to 250 kg, without any joints. We guarantee excellent performance with no cleaning slag, minimal welding spatter, a smooth surface, high welding efficiency, and a transition coefficient above 0.9.

Introduction：

1. Smooth wire feeding, stable arc, uniform diameter

2. Less spatter and less smoke during welding, with above 90% hardfacing efficiency

3. Each drum packed with one whole piece of welding wire, without any joint, no broken arc phenomena during welding to improve production efficiency

4. Developed 108 kinds of flux-cored wear-resistant welding wires suited to the metalwear-resistant field, satisfying the wear-resistant requirements of many parts under various working conditions

5. The base plate and the resistant overlay are metallurgically bonded. After welding, the wear-resistant layer does not fall off due to uniform stress relief

6. We can provide qualification certificates, product data sheets, hardfacing technology, hardfacing layer composition, hardness test reports, etc.

Our Advantages

1. Chemical Composition: High carbon high chromium

2. Hardness: HRC58-65

3. Good Performance: no clearing slag, low welding spatter, smooth surface, high welding efficiency, stable filling rate, etc.

4. welding wire without any joints.

5. Production Capacity: 8000 tons per year

6. Short Delivery Time: Generally 7 days

7. We have many experienced professionals to research and develop welding wires according to customers' specified chemical compositions.

8. We can recommend proper welding wires and provide technical solutions based on working conditions.

9. on site inspection and third party inspection are available.

10. As an ISO9001:2008 approved manufacture, our mission is to improve our management system and provide high quality products continuously.

Wodon Wear-Resistant High Alloy Steel Welding Wire Parameter Table

Wodon Gas Shielded Hardfacing Welding Wire Parameters

Steel Mill Roller Welding Wire Parameters

Cement Squeeze Roller Welding Wire Parameters

Vertical Cement Mill Welding Wire

After-Sales Service
? Professional Support: Our after-sales service team has extensive experience in hard-facing products and their applications, and can quickly respond to customer inquiries and issues, typically resolving them within 12 hours of notification.
? Equipment Operation Support: The team is also skilled in operating hard-facing equipment and can assist customers in resolving equipment-related issues, ensuring smooth equipment operation and correct product use.

Frequently Asked Questions

Q: Are you a trading company or a manufacturer?
A: We are a manufacturer with 3 factories, an internal sales department, and a specialized inspection and technical department, allowing us to independently produce and offer high-quality products and services.

Q: What is your delivery time?
A: If the product is in stock, delivery time is 5-10 days; if out of stock, delivery time is 15-20 days, depending on the order quantity.

Q: Do you provide samples? Are they free or chargeable?
A: Yes, we provide free samples to allow customers to better understand the product's performance and quality.

Q: What are your payment terms?
A: Payment terms are 30% prepayment, with the balance paid after the bill of lading copy is issued. We offer flexible payment options including FOB, CIF, CFR, etc.

Contact Us

If you have any questions or need more information about Wodon Super Wear-Resistant Steel Plates, please feel free to contact us. We are dedicated to serving you.