Jiangsu Wodon Wear Resistant New Material Co., Ltd.: 1Yr

Huaian, Jiangsu, China; Main products: Chromium Carbide Overlay Wear Plate, CCO Wear Plate, Hardfacing Flux Core Wire, Chromium Carbide Wear Pipe

Home
Product Categories

Ungrouped

CCO Wear Plate

Flux Core Welding Wire

Wear Components

Wear Pipes and Fittings

Wear parts
Company Profile

Company Introduction

Photo Gallery
Blog
Quality Control
Contact Us

Home > Products > Flux Core Welding Wire > Wodon Factory hardfacing mig weld wire

Wodon Factory hardfacing mig weld wire

FOB Price

US$ 4.02 - 4.02 / Kilogram

1 Kilogram(Min. Order)

Payment TermsT/T Credit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Description

Wodon Factory Welding Wires

Characteristics:
1. A whole wire with no joint within one drum;
2. Uniform wire diameter, smooth wire feeding;
3. Stable arc, less spatter and smoke, no broken arc phenomena during welding;
4. Hardfacing efficiency over 90%;
5. Metallurgical bonding to base metal, uniform stress relief of after weld metal.

Flux cored welding wire We develop our wear resistant flux cored welding wires always according to working condition. This guarantee good performanceregarding no cleaning slag, low welding spatter, smooth surface, high welding efficiency. The Filling rate of flux cored welding wire are about 50% with tolerance 1%, so that the chemical composition after welding are uniform and stable. We use advanced CNC system and regular test during the production, so guarantee the good welding result. Wodon hardfacing welding wire with super wear resistance 1. Type: flux cored welding wire for hardfacing/surface welding/cladding 2. Diameter: 1.2 mm, 1.6 mm, 4.0 mm, customized. 3. Standard: GB 4. Certification: ISO9001:2008, ISO14001:2004, OHSAA 18001-2007
Model	Diameter [mm]	Hardness [HRC]	Main Ingredient [%]	Main application and characteristics
D688	1,2;1,6	50-58	C: 2.5-5.0 Cr: 22.5-27.5	Apply to a serious part of grinding wear surfacing, multi-layer welding. Surfacing layer thickness can be up 50 mm
D788	1,2;1,6	50-60	C: 3.0-4.5 Cr: 24-30	Apply to a serious part of grinding wear surfacing welding, welding layer thickness control under 20 mm
D888	1,2;1,6	58-65	C: 3.5-4.5 Cr: 24-27.5	Apply to a serious parts of abrasive wear surfacing welding, welding layer thickness control under 10 mm
D788A	1,2;1,6	50-60	C: 3.0-4.5 Cr: 20-25	Apply to a serious parts of abrasive wear surfacing, limited to single layer welding.
D788M	1,2;1,6	60-66	C: 3.0-4.5 Cr: 24-30	Apply to a serious parts of abrasive wear surfacing
D688 Welding Rod	4.0	50-58	C: 2.5-5.0 Cr: 22.5-27.5	Suitable for severe abrasive wear parts hardfacing welding, surfacing layer thickness control under 20 mm

Gas Shelding Welding Wire
Application	Model	Diameter (mm)	Hardness (HRC)	Main Ingredient
High manganese steel hardfacing wire, Suitable for hardfacing hammer head, hammer plate and other high impact parts	D114	1.6	50-55	C, Cr, Mn
Suitable for hardfacing bucket gear, mining machinery and other wear parts	D172	1.2, 1.6	≥40	C, Cr, Mo
Suitable for hardfacing the surface of wear parts, such as gear, digger. mining machinery and etc.	D212	1.2, 1.6	≥45	C, Cr, Mo
Suitable for hardfacing high manganese rail, bulldozer and other wear parts under impact.	D256	1.6	HB≥170	C, Mn
Suitable for hardfacing continuous casting roll	D313	1.6	45-50	C, Cr
Suitable for repairing die and toughening tool, and mechanical parts with high wear performance	D322	1.6	55-63	C, W, Mo
Suitable for hardfacing hot rolling roll	D405	1.6	53-60	C, Cr, Mo, W, V
Suitable for hardfacing general corrosion resistant parts	D430	1.6	35-40	C, Cr
Suitable for hardfacing valve	D502Mo	1.6	35-45	C, Cr, Mo
Suitable for hardfacing continuous casting roll	D518	1.6	40-50	C, Cr, Mo, Ni
Suitable for hardfacing heavy wear parts, multi-layer welding up to 50 mm	D688	1.2, 1.6	50-58	C, Cr
Suitable for hardfacing heavy wear parts, multi-layer welding up to 20 mm	D788	1.2, 1.6	50-60	C, Cr
Suitable for hardfacing heavy wear part, single layer welding only	D788A	1.2, 1.6	50-60	C, Cr
Suitable for hardfacing heavy wear parts, multi-layer welding up to 10 mm	D888	1.2, 1.6	58-65	C, Cr
Suitable for hardfacing heat resistant wear parts	D995	1.6	58-65	C, Cr, Nb, W, V
Cement Squeeze Roller Welding Wire
Application	Model	Diameter (mm)	Hardness (HRC)	Main Ingredient
Suitable for base layer	HB-JYG1#	2.8	-	C, Cr, Mo
Suitable for buffer layer	HB-JYG2#	2.8	55-63	C, Cr, Mo
Suitable for pattern layer	HB-JYG3#	2.8	55-63	C, Cr, Mo
Flux cored welding wire
Model	Spec. (mm)	Hardness (HRC)	Main Ingredient (%)
HB-YD172	1.2, 1.6	≥50	C: 0.4-0.5 Cr: 1.5-2.5 Mo: 1.5-2.5
Main Application:Used for surfacing welding gear, mining machinery, such as wear and tear parts.
Flux cored welding wire
Model	Spec. (mm)	Hardness (HRC)	Main Ingredient (%)
HB-YD313	1.6	45-50	C: 0.2-0.3 Cr: 11-14
Main Application:Used for continuous casting roller surfacing.
Flux cored welding wire
Model	Spec. (mm)	Hardness (HB)	Main Ingredient (%)
HB-YD256	1.6	≥170	C: 0.5-1.1 Mn: 10-17
Main Application:Used for all kinds crusher, high manganese steel rail, bulldozers and other easy wear welding parts.
ACME hammerhead and hammer plate hardfacing welding wire with wear and impact resistance
Model	Spece. (mm)	Hardness (HRC)	Main Ingredient (%)	Application and characteristics
ACME-D114	1.6	50~55	C: 0.45~1 Cr: 2~3 Mn: 14~18	High manganese steel surfacing welding wire, after violent shocks has the surface the characteristics of the strain hardening, suitable for welding such as impact hammerhead, hammer plate parts
Our company develop our own ACME-series welding wire, which is self gas shielding welding wire. When you use our welding wire don't need shutz gas. After using of our ACME-D114 high manganese surfacing welding wire to surfacing impact hammerhead and hammer plate have very good Impact resistance because of High chemical composite from flux core.
ACME high standard wear resistant flux cored mig welding wire for hardfacing roller
Mig welding wire We develop our wear resistant flux core welding wires always according to working condition. This guarantee good performance regarding no cleaning slag, low welding spatter, smooth surface, high welding efficiency.
Model	Spec. (mm)	Hardness (HRC)	Main Ingredient	Application and Characteristics
ACME-D430	2.4, 3.2	35~40	C: 0.1~0.25 Cr: 16~18	Used for general corrosion-resistant components surface welding
ACME-D320H	3.2, 4.0	---	C: 0.1~0.25 Cr: 12~14	Suitable for continuous casting roll surface welding
ACME-224	3.2, 4.0	45~55	C: 0.25~0.35 Cr: 5.5~7.5 Mo: 0.8~1.5 W: 1.0~2.0 V: 0.5~1.0	Suitable for hot-rolled billet roller surface welding
ACME-224B	3.2, 4.0	53~60	C: 0.25~0.55 Cr: 5.5~7.5 Mo: 0.8~1.5 W: 1.0~2.0 V: 0.5~1.0	Suitable for hot-rolled billet roller surface welding
ACME-414N	3.2, 4.0	40~50	C: 0.05~0.15 Cr: 11.5~14.5 Mo: 0.5~1.5	Suitable for continuous casting roll suface welding
ACME-414-0	3.2, 4.0	40~50	C: 0.05~0.15 Cr: 11.5~14.5 Mo: 0.5~1.5	Suitable for continuous casting roll surface welding

ACME manufactured wear resistant hardfacing wire for vertical mill
Vertical Mill use wear resistant welding wire to repair Our company is also specialized in manufacturing Vertical Mill welding wires (ACME series). These serie's models have excellent welding performance and present great welding forming and low welding spatter. We can guarantee high Hardness and abrasion resistance after repairing, resulting in a service life no less than 8000 hours. We have a special team, who have a extrem experience in repairing the Vertical Mill and targeted special selection of repairing welding wires from our WD Series.
Model	Spec. (mm)	Hardness (HRC)	Main Ingredient	Application and Characteristics
ACME100	2.4, 2.8, 3.2	55~62	C: 3.0~5.0 Cr: 25~30 Mo: 0.5~1.0	Used for repairing grinding coal mill roller of thermal power plant.
ACME100A	2.4, 2.8, 3.2	57~62	C: 3.0~5.0 Cr: 27~32 Mo: 0.5~1.0	Used for repairing cement roller mill of raw material, clinker and slag.
ACME350	2.4, 2.8, 3.2	55~62	C: 3.0~5.0 Cr: 22~28 Mo: 0.3~1.0 Nb: 3.0~4.5	Used for repairing cement roller mill of raw material, clinker and slag.
ACME350A	2.4, 2.8, 3.2	57~62	C: 3.0~5.0 Cr: 22~28 Mo: 0.3~1.0 Nb: 3.0~4.5	Used for repairing cement roller mill of raw material, clinker and slag.
ACME650	2.4, 2.8, 3.2	55~63	C: 3.0~5.0 Cr: 22~28 Mo: 0.3~1.0 Nb: 6.0~7.5	Used for repairing cement roller mill of raw material, clinker and slag.
ACME650A	2.4, 2.8, 3.2	57~63	C: 3.0~5.0 Cr: 20~26 Mo: 0.3~1.0 Nb: 6.0~7.5	Used for repairing cement roller mill of raw material, clinker and slag.

Specification

ACME welding wire advantages.

1. Good Performance: no clearing slag, low welding spatter, smooth surface, high welding efficiency, stable filling rate, etc.

2. welding wire without any joints, vacuum packing into carton,Quality warranty period longer than one year.

3. Production Capacity: 9000 tons per year

4. Short Delivery Time: Generally 7 days

5. We have many experienced professionals to research and develop welding wires according to customers' specified chemical

compositions.

6. We can recommend proper welding wires and provide technical solutions based on working conditions.

7. on site inspection and third party inspection are available.

8. As an ISO9001:2008 approved manufacture, our mission is to improve our management system and provide high quality products continuously.

After-sales commitment

Our company has a professional after-sales service team, with many years of experience not only on hardfacing products and applications, but also on the operation of application equipment. We are able to quickly solve customer's problems. If there are any quality problems, the responsible person will provide reasonable solutions within 12 hours after being notified.

Quality Control

We have our own inspection technology department. The team are made of many experienced technical with material science bachelor degree and the team leader are with master degree. They are very professional to inspect and run test on the products. According to our company's policy each our product have a special number, so we can trace back to anywhere, if there are quality problems.We have our own Quality Inspection Technology Department and the team are made of many experience exports with material science bachelor-degree and the leaders with material science master-degree. In the pictures you can also see our equipment in our laboratory. Our inspection team make regular testing on raw material, production process and our products according our company's strict policy.

General Description: Characteristics: 1. A whole wire with no joint within one drum; 2. Uniform wire diameter, smooth wire feeding; 3. Stable arc, less spatter and smoke, no broken arc phenomena during welding; 4. Hardfacing efficiency over 90%; 5. Metallurgical bonding to base metal, uniform stress relief of after weld metal.
ACME flux cored gas shielding surface welding gear welding wire We developed our own flux cored welding wire with customized ingredient for all kinds of working conditions. Our welding wires has following advantages: 1. smooth wire feeding, stable arc , uniform diameter 2. less patter and smoke during welding, above 90% hardfacing efficiency 3. every drum packed with one whole PC of welding wires, without any joint, no broken arc phenomena during the welding to improve production efficiency 4. developing more than 100 kinds of flux cored wear resistant requirements of many wear resistant field which can satify the wear resistant requirements of many wear resistant parts under all kinds of working conditions. 5. the base metal and the wear resistant overlay are metallurgical bonding; after welding, the wear resistant layer doesn't fall off because of uniform stress relief. We can provide qualification certificate, product data sheet, test report including chemical compostion, hardness, etc of wear resistant overlay.
Model	Spec. (mm)	Hardness (HRC)	Main Ingredient (%)	Application and Characteristics
ACME-ZYG100 (1#)	1.6, 2.8, 4.0	--	C: 0.03~0.15 Mn: 0.5~2.5	Used in squeeze roller backing welding
ACME-ZYG100 (1996)	1.6, 2.8, 4.0	--	C: 0.05~0.15 Cr: 18~22 Ni: 8~11 Mn: 4~7	Used in squeeze roller backing welding
ACME-ZYG200	1.6, 2.8, 4.0	20~35	C: 3.5~4.6 Cr: 4.0~6.0 Mo: 0.3~1.0 Nb: 0.3~1.0	Used for welding transition layer of extrusion roller
ACME-ZYG300	1.6, 2.8, 4.0	50~55	C: 0.3~1 Cr: 5~10 Mo: 0.5~1.5 Nb: 1~3	Used for welding transition layer of extrusion roller
ACME-ZYG500	1.6	55~60	C: 0.5~2.5 Cr: 5~10 Mo: 0.5~1.5 Nb: 3~6	Used in welding extrusion roller surface and pattern layer

How to product flux cored welding wires?

After cutting and joining into the steel strip with our fixed width, the roller squeezes our steel strip into "U Type" form and filled up with flux powder with our own special ingredient. The primary flux cored welding wire are continuously to stretch through the different diameter of the abrasive tool. After that, our flux cored welding wires are going to be packeted without a joint into Drum or Spool with waterpoof and desiccant. During the process and after process we have strickly inspection policy about the filling rate, bending rate, chemical composition and welding perform etc.

1. Cutting steel strip

Our steel belt is purchased from China's large steel belt factory. We will test the thickness and stretchability of the steel strip. And cutting the steel belt into 9 segments,then connect these steel belt by steel band butt welder, no broken ends.

2. Cleaning steel strip

Get into the ultrasonic cleaning machine for cleaning the steel strip, and then drying,no water stains on the steel strip.

3. Filling into powder of flux cored welding wires

Firstly, the steel strip is extruded into a U-shaped through the machine,then filling the powder into the steel strip. We have more than 100 kinds of flux cored welding wire, according to the specific purpose to recommend the most suitable flux cored welding wire model. And we can also specialize in the development of customer needs flux cored welding wire. R & D of flux cored welding wire allows customers to test.

4. Drawing forming

Our flux cored welding wire's standard diameter have 1.2mm; 1.6mm; 2.4mm; 2.8mm; 3.2mm; 4.0mm. And we have the CNC machine to control the powder flow, the fluency of welding wires feeding and the diameter. The system of this CNC machine is debugged by our own technical staff, can ensure good wire production efficiency.

5. Packing and finished product's inspection

The packing sizes of our welding wire are 150-250kg/barrel and 15kg/box. Our packing barrels are waterproof, and 4 packets of desiccant are placed in each barrel. In order to protect the wire, it is not easy to damp. Each barrel (package) welding wire is a whole welding wire, without joint. The welding process has no arcing phenomenon and

improves production efficiency. As well as, our quality control personnel will check whether the finished welding wire is qualified every day.

ACME manufactured Tungsten carbide flux cored welding wire for die and tough
Our company developed special tungsten carbide flux cored welding wires are with super good wear resistance and good impact resistance, which are suitable for wear parts with heavy wear like die and tough. After welding garantee a hardness 55-63 HRC or 600-780 HV, no need for shutz gas,no cleaning slag, low welding spatter, smooth surface, high welding efficiency.
Model	Diameter [mm]	Carbon [%]	Tungsten [%]	Molybdenum [%]
D322	1.6	0.3-0.5	7-10	0.5-2.5
Hardness [HRC]	55~63				55~63
Application	Suitable for repairing die and tough, and require a higher wear properties of mechanical parts.				Suitable for repairing die and tough, and require a higher wear properties of mechanical parts.

ACME wear resistant flux cored welding wire for hardfacing steel factory hot roller
1. Type: flux cored welding wire for hardfacing. 2. Diameter: 1.6 mm, 3.2 mm, 4.0 mm, customized. 3. Standard: GB 4. Certification: ISO9001:2008, ISO14001:2004, OHSAA 18001-2007
Model	Diameter [mm]	Hardness [HRC]	Main Ingredient [%]	Application
WD224	3.2；4.0	45-55	C: 0.25-0.35 Cr: 5.5-7.5 Mo: 0.8-1.5 W: 1.0-2.0 V: 0.5-1.0	Suitable for hot rolling roller surfacing welding, after welding have good wear, impact and heat resistance.
WD224B	3.2；4.0	53-60	C: 0.25-0.35 Cr: 5.5-7.5 Mo: 0.8-1.5 W: 1.0-2.0 V: 0.5-1.0	Suitable for hot rolling roller surfacing welding, after welding have good wear, impact and heat resistance.
WD405	1.6	58-65	C: 0.25-0.35 Cr: 5.5-7.5 Mo: 0.8-1.5 W: 1.0-2.0 V: 0.5-1.0	Suitable for hot rolling roller surfacing welding, after welding have good wear, impact and heat resistance.

Warehouse

In our Warehouse are strictly managed, so our raw material and our products always good protected and are able to transport quickly and efficient.

1,Portable Spectrum

We run regular test on our products according to company's policy based on ISO9001:2008

2, Rockwell Hardness tester

We are welding the welding wire on our experiment table, and cutting into small samples, so we can test the hardness and chemical composition.

3,Welding wire experiment table

In our labor can those small samples betested seriously like Hardness chemicalcomposition,weldingperformance etc.

4,Factory

Our Factory have 2000 square meters for Office and total 4300 square meters for office, workshop and warehouse. Now we are building a new branch factory in Jiangsu to improve our production capacity.

5,Workshop

We have 3 workshops and total 36000 square meters, after the new branch finished will be one more big workshop to production. In June 2017 operation the new factory all function to production.

6,Warehouse

We have two warehouses and totally area 5000 square meters. Our logistic department are in charge of the distribution our products, so that our client can have the goods in shot time.

ACME wear plates are used to make many complex wear parts to be positioned in high wear places. We have several equipments to transform our plates: six sets of plasma cutting machines, four bending machines and pressing machines, with high processing capacity operated by engineers and technical experts. We can provide wear plate cutting, bending, bolting, punching and welding according to customer's drawings.

Our products can be processed into different kinds of wear parts used in kinds of fields.
1. screen plate/vibrating plate
2. proetection cover
3. bolt embedded in the back
4. round to square transition
5. bend
6. trough

Welding wire for hardfacing coal scraper conveyor
Central groove after using high hardness flux core wire We develop our wear resistant flux cored welding wires always according to working condition. This guarantee good performance regarding no cleaning slag, low welding spatter, smooth surface, high welding efficiency. We can guarantee high hardness and abrasion resistance after repairing, resulting in a service life no less than 8000 hours.
Model	Spec. (mm)	Hardness (HRC)	Main Ingredient	Application and Characteristics
ZBS-100 (D212)	1.2, 1.6	≥50	C: 0.4~0.7 Cr: 4.0~5.5 Mo: 0.8~1.5	Used for surface welding, the surfaces of all wear parts, such as gears, bucket, mining, machinery etc.
ZBS-200 (D688)	1.2, 1.6	45~55	C: 2.5~5.0 Cr: 22.5~27.5	Apply to a serious part of abrasive wear surface multi-layer welding. Surfacing layer thickness can be up to 50 mm.
ZBS-300 (D888)	1.2, 1.6	58~65	C: 3.5~4.5 Cr: 24~27.5	Apply to a serious part of abrasive wear surface welding, welding layer thickness control under 10 mm.

We have our own Quality Inspection Technology Department and the team are made of many experience exports with material science bachelor-degree and the leaders with material science master-degree. In the pictures you can also see our equipment in our laboratory. Our inspection team make regular testing on raw material, production process and our products according our company's strict policy. In our Laboratory there are the Rockwell Hardness tester to test the Hardness of the small welding samples, the portable Spectrum to test the chemical compostion easily at the work pieces on the scene, the portable Hardness tester to test the Hardness easily at the work pieces on the scene and the portable ultrasonic thickness measurement instrument to test the thickness easily and accurate. There are also abrasion resistance testing machine and a series of metallograhy experiment instruments, so the metallurgical microstructure and wear resistance can be tested. The below picture shows our laboratory. There are many equipments to suppert our Quality Inspection Technology Department, for sample: a series of metallographic analysis equipments, protable spectrum, protable ultrasonic thickness tester, protable ultrasonic hardness tester, destop Rockwell hardness tester, Infrared carbon sulfur analyzer, Quartz sand rubber wheel abrasion test machine and Reciprocating abrasion tester.

We are certified with the ISO9001:2008 and keep continuously improving our quality management system. We have strict procedures for raw materials, products inspection, production process, storage management and after sales service.We are certified with the ISO1400:2004 and keep continuously improving our environmental management system. We use the electric boiler not the coal fired boiler to protect the environmental. We use the advanced dust removal and ventilation equipment to keep the air clean. We are certified with the OHSAS18001-2007 and keep continuously improving our occupational health and safety management system.Our every technical staff wears filter mask, protective clothing and gloves and welding goggles.

Packing & Delivery

Packaging: 15 kg/spool, vacuum packing into carton, Steel Pallet, Plastic film, Customized.

Packing Size: 1.15 m*0.58 m*0.88 m, 1.15 m*1.15 m*0.88 m, customized.

Delivery Detail: Generally 7 days, if the goods are in stock. or it is 10~15 days if the goods are not in stock, it is according to quantity.

Shipment: Loading into 20 ft or 40 ft Container.

We packet our flux cored welding wire in different weight according to the Diameter. Welding wires of the Diameter 1.2 mm and 1.6 mm are 15 kg/spool, without joint vacuum packed into carton. Welding wire of the Diameter 2.8 mm, 3.2 mm and 4.0 mm are 50 kg/spool or 150~250 kg/drum without joint with Desiccant waterproof packed. So our flux cored welding wire can stand effect with in 6~12 mouth, if the goods are stored properly.

Company Profile

Jiangsu Wodon Wear Resistant Material Co., Ltd (CHINA WODON) is a company which is specialized in researching and developing wear resistant material. The company was founded in 2014. Now we have more than 300 employees, including more than 15 R&D staffs. Our company's registered capital is 30,000,000 CNY, with an annual output of 9,000 tons welding wire and 200,000 square meters wear plate. With numerous experienced technicians and excellent engineers, our product quality has improved constantly. Since company established, we are adhering to professional development road and win the market with the leading technological level, the excellent product quality and the integrative service concepts. We keep a long-term cooperation with Beijing University Of Technology, Iron And Steel Research Institute, Beijing Electric Power Equipment Research Institute, etc. Jiangsu Wodon main products: wear plates, wear plate welding wires, coal grinding roller welding wires, vertical cement mill welding wires, squeeze

roller welding wires, roller welding wires, etc. We have independent intellectual property right, multiple patents, professional team for researching and debugging, providing one-stop services for customers. Jiangsu Wodon poducts are widely used in many industries, for example: power, iron and steel, cement, glass, mining, coal processing, metallurgical machinery, engineering machinery, loading machinery, port transportation, etc. Wear resistant plate is far ahead of other similar products on the market in many ways, such as chemical composition, microstructure, hardness, wear resistance performance, flatness, etc. Our wear plate can greatly extend maintenance time, thereby reducing maintenance cost in the practical application. Jiangsu Wodon persist to the principle of responsibility, profession, openness and sharing. Exploring business innovation, strengthening persionne development, improving management structure and optimizing operating mechanism. The company implements humanized management,
provides study opportunites, continuously improves welfare and work environment. To the pursuit of perfect quality and customer satisfaction, we have certified with ISO9001 quality management system, ISO14001 environmental management system, OHSAS18001 occupational health and safety management system. We sincerely provide high quality wear resistant products and services to customers. We will always supply our best products, adhere to quality first and keep up the spirit of striving for perfection.We use our own developed CNC automatic welding machine with multi welding guns to weld our own hardface wear plate. These can overcome the problems like: low productivity, poor flatness and overlay falling off etc. This is a high automation level machine, each welding gun can operate independently and restart exactly from the point it had stopped, simplifying the operation process.

FAQ

Jiangsu Wodon Wear Resistant Material Co., Ltd. (China Wodon) is headquartered in Jiangsu, a port hub city in North China. There are over 300 staffs, including 30 experienced R&D engineers. Our main products include: Chromium carbide overlay (CCO) wear plates, Flux cored hardfacing welding wires etc.With independent intellectual property rights and a number of patents, we have a strong R&D and debugging team, which can provide customers with a streamlined service.Since its inception, with the huge investment and independent technology research and innovation, Wodon has been taking the lead
in providing premium quality CCO wear plates, hardfacing welding wires as well as excellent repairing technique, all of which win trust and acceptance from our clients worldwide. Meanwhile, the company also employs many experts and professors in the wear resistant industry as the company’s technical consultant to ensure strong technical strength and production capacity, we are dedicated to providing quality and cost-effective wear solutions that completely fulfill the requirements of clients.4 Major production bases: Jiangsu, Hebei, Hunan, Jiangsu. 68 Wear plate production lines (over 130 welding torches). 5 Welding wire production lines.Annual output of chromium carbide wear plates: 200,000 square meters
Annual output of flux cored hardfacing wires: 9000 tons.

Q: Are you trading company or manufacturer ?

A: We are manufacturer with more than 3 factorys, our own sales department and our own inspection technology department.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to

quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge.

Q: What is your terms of payment ?

A:30% T/T in advance ,balance against copy of BL. also, FOB, CIF, CFR all are available for your product.

Q:who are we?
A:We are based in Jiangsu, China, start from 2014,sell to Domestic Market,Oceania,North America,South

America,Africa,Eastern Europe,Central America,Southeast Asia,South Asia. There are total about 301-500 people in our office.

Q:how can we guarantee quality?

A:Always a pre-production sample before mass production;Always final Inspection before shipment.

Q:what can you buy from us?
A:Chromium Carbide Overlay Plate,Wear Plate Liner,Flux Cored Welding Wire

Q:why should you buy from us not from other suppliers?
A:The chromium content as high as 25~50% in the overlay The chromium carbide (Cr7C3) volume fraction above 50% Uniform distribution and high hardness HRC 58~65 Smooth surface, thickness tolerance +0~+0.5 mm only Flatness tolerance -3~+3 mm/m

Q: what services can we provide?

A:Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery；
Accepted Payment Currency:USD,AUD,CNY;
Accepted Payment Type: T/T,L/C,Cash;
Language Spoken:English,Chinese,Spanish,Portuguese,German

If you have another question, pls feel free to contact us as below:

Company Profile

Jiangsu Wodon Wear Resistant New Material Co., Ltd.

Jiangsu Wodon Wear Resistant New Material Co., Ltd. (China Wodon) is a manufacturing factory specializing in the development and production of wear resistant materials. We are headquartered in Jiangsu. There are over 500 staff, including 60 experienced R&D engineers. Our main products include: chromium carbide overlay (CCO) wear plates, flux cored hardfacing welding wires, etc. With independent intellectual property rights and a number of patents, it has a strong R&D and debugging team, which can provide customers with a streamlined service.Since its inception, with the huge investment and independent technology research and innovation, Wodon has been taking the lead in providing premium quality CCO wear plates, hardfacing welding wires as well as excellent repairing technique, all of which win trust and acceptance from our clients worldwide. Meanwhile, the company also employs many experts and professors in the wear resistant industry as the company\'s technical consultant to ensure strong technical strength and production capacity, we are dedicated to providing quality and cost-effective wear solutions that completely fulfill the requirements of clients.?

Contact Us

Jiangsu Wodon Wear Resistant New Material Co., Ltd.: Contact namezhang
Chat Now; AddressNo. 888, Kaituo Road, Hongze Economic Development Zone, Huaian, Jiangsu

*Email
Please enter Your valid email address.
*To

zhang
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Ungrouped	CCO Wear Plate	Flux Core Welding Wire	Wear Components
Wear Pipes and Fittings	Wear parts

Wodon Factory hardfacing mig weld wire

You May Like

Product Description

1,Portable Spectrum

2, Rockwell Hardness tester

3,Welding wire experiment table

4,Factory

5,Workshop

6,Warehouse

Company Profile

Contact Us

Product Categories

New Products

Popular Searches

Find Similar Products By Category