Endress+Hauser Vibronic Point level detection Soliphant FTM50-AGG2A2A12AA

Endress+Hauser Vibronic Point level detection Soliphant FTM50-AGG2A2A12AA

Specs at a glance

Process temperature

-50°C ... 280°C

(-60°F ... 540°F)

Process pressure / max. overpressure limit

Vacuum ... 25 bar

(Vacuum ... 360 psi)

Min. density of medium

Standard fork: 10 g/l

Short fork: 50 g/l

Field of application

Soliphant FTM50 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk.

Point level switch for fine grained solids and powder.

Process connections: Threads, flanges and hygienic connection (Tri-Clamp)

Temperature: -50 to +280°C (-60 to +540°F)

Pressure: -1 to +25bar (-14.5 to +360psi)

Sensor length: 145mm, 200mm

Sensor material: 316L (3,2μm, 0,8μm, PTFE coated, ETFE coated)

International explosion protection certificates

Benefits

SIL2 in accordance with IEC 61508

No mechanically moved parts, free of maintenance

Measurement not affected by build-up or external vibration

Various electronic inserts: e.g. NAMUR, relay, thyristor and PFM-signal outputs for optimum alignment with the plant control system

Build-up and abrasion display selectable, density setting and switching delay selectable

Choice of coated or polished sensor

Build-up and corrosion detection

Measuring principle

Vibration Solids

Characteristic / Application

Compact point level switch for fine grained solids and powder

Grain size <= 10 mm (<= 0.39 in)

Fork sensor

No calibration required

Not affected by build-up or external vibration

Robust

Switch value visible from outside

Specialities

Build-up and corrosion detection

Remote version

3 temperature versions available

SIL 2

Supply / Communication

10-55V DC PNP 3-wire

19-253V AC 2-wire

19...253V AC / 19V...55V DC 2 relay contact

8/16mA

NAMUR

PFM

Ambient temperature

-50°C ... 70°C

(-60°F ... 160 °F)

Process temperature

-50°C ... 280°C

(-60°F ... 540°F)

Process pressure / max. overpressure limit

Vacuum ... 25 bar

(Vacuum ... 360 psi)

Min. density of medium

Standard fork: 10 g/l

Short fork: 50 g/l

Main wetted parts

selectable:

316L 3,2um

316L 0,8um

316L PTFE coated (to avoid build-up)

316L ETFE coated (to avoid corrosion)

Process connection

Thread

R 1 1/2"

1 1/4" NPT

1 1/2" NPT

EN Flange DN50...DN100

ASME Flange 2"...4"

JIS Flange 50A...100A

Process connection hygienic

Tri-Clamp ISO2852

Sensor length

Standard: 200mm (8")

Short: 145mm (5.7")

Communication

DC PNP 2-wire

AC Thyristor

DPDT relay

8/16mA

NAMUR

PFM

Certificates / Approvals

ATEX, FM, CSA, CSA C/US, IEC Ex, JPN, INMETRO, NEPSI, EAC

Safety approvals

SIL

Design approvals

EN 10204-3.1

Options

Glass cover

Temperature spacer

EN10204-3.1

Components

PFM: FTL325P, FTL375P

NAMUR: FTL325N, FTL375N

Endress + Hauser FMI51-A1AGDJB2A1A  Capacitance Level measurement 

Endress + Hauser FMI51-N1AGDJB2A1A  Capacitance Level measurement 

Endress + Hauser Vibronic Point level detection Liquiphant FTL31-AA4M2AAWCJ

Endress + Hauser FMI51-A1BASJA4A1A Capacitance Level measurement Liquicap FMI51

FTM50-AGG2A4A32AA

FTM50-AGJ2A4A13AA

FTM50-AGG2A4A14AA

FTM50-AGG2A4A12AA

FTM50-AGJ2A4A14AA

FTM50-AGJ2A4A52AA

FTM50-ZGJ2A4A52AA+1

FTM50-1GG2A7A52AA