Vacuum Bottle Perpendicularity Testing Equipment Shaft Deviation Measurement Instrument Glass Bottle Verticality Tester

PER-01 Perpendicularity Tester

Application

The Perpendicularity Tester, also known as the Bottle Deviation Tester, Coaxial Tester, Coaxiality Tester, or Circle Runout Tester (for vials, etc.), is primarily used for measuring the perpendicularity or verticality of different bottle containers in industries such as food, cosmetics, and pharmaceuticals. This precision instrument is widely utilized by bottle manufacturers, end-users, and research facilities to assess and ensure the vertical alignment of bottles, ensuring that they stand straight and upright.

Working Mechanism

The operation of the Perpendicularity Tester involves securing the bottle onto a rotating plate with its mouth in contact with a dial gauge. After rotating the bottle a full 360 degrees, two readings are recorded: the maximum and minimum values obtained during the rotation. The vertical axis deviation value is then calculated as half of the difference between these two recorded values. In summary, the steps to determine the vertical axis deviation value using the Perpendicularity Tester are as follows:

1. Fix the bottle securely onto the rotating plate.

2. Position the dial gauge so that it makes contact with the mouth of the bottle.

3. Rotate the bottle a full 360 degrees.

4. Record the maximum and minimum readings obtained on the dial gauge during the rotation.

5. Calculate the vertical axis deviation value by taking half of the difference between the maximum and minimum readings.

Technical Features

1. Convenient Probe Adjustment: Simple and hassle-free fine-tuning of the measuring probe. 

2. Exceptional Reading Precision: Achieving high-resolution readings with accuracy down to 0.001mm.

3. Consistent Sample Rotation: Ensuring a steady and stable rotation of the sample.

4. Adherence to Sample Specifications: Meeting the specific sample requirements for measuring both diameter and height.

5. Optional Data Export to PC Excel: Providing the choice to export data to PC Excel, enhancing data management and analysis capabilities.

Technical Data

Sample Diameter 5mm-145mm (or as required) 

Test Rage 0-12.7mm (or as required)

Division value 0.01 or 0.001mm(optional)

Measurable Height 15mm-300mm (or as required)