ISO16945 Crush Tester ISO 3035 ISO 7263-1 Crush Testing Machine for Paper

YSD-01 Crush Tester

Application

Fibreboard shipping containers are frequently subjected to in-plane compressive forces during shipment or storage. Therefore, resistance to crushing is an important measure of the performance characteristics of the containers.

The resistance to crushing depends on the design of the containers and on the in-plane crush resistance of the components of the board from which it is made.

ECT

Edgewise Crush Resistance Test is used to determine the edgewise compressive strength (ECT) perpendicular to the axis of the flutes of fiberboard.

RCT

Ring crush test is used for the determination of the edgewise compressive strength (ring crush resistance) of paper and paperboard.

PAT

Pin adhesion tester is used to measure the force required to separate corrugated board between the flute tips of corrugated medium and its linerboard facings.

FCT

Flat crush test is used for the determination of the flat crush resistance of singlefaced and single-wall (double-faced) corrugated fibreboard.

CMT

Corrugating medium flat crush tester is used to determine the flat crush resistance of a corrugating medium after laboratory fluting.

CCT

Edge crush resistance is the maximum edgewise compression force per unit length that a laboratory fluted test piece will withstand before onset of break.

Standards

RCT: GB/T 2679.8, ISO 12192, TAPPI T822

ECT: GB/T 6546, ISO3037, TAPPI T811, TAPPI T 838, TAPPI T839

PAT: GB/T 6548, TAPPI T 821, JIS Z 0402

FCT: GB/T 22874, ISO 3035, TAPPI T825

CMT: ISO 7263-1, TAPPI T809, QB/T 1061, GB 2679.6

CCT: ISO16945, TAPPI T843

Main Parameters

Test Range 5~3000N

Accuracy ≤±1%

Resolution 0.01N

Platen Parallelism ≤0.05mm

Test Speed 12.5±1mm/min

Platen Diameter 125mm

Stroke 80mm

Test Mode RCT, ECT, FCT, PAT, CMT, CCT

HMI 7in Touch Screen Display

Print Output Integrated Thermal Printer

Dimensions 400*360*550mm

Weight About 45kg