Concora Medium Fluter

Application

CWY-01 Concora Medium Fluter is used as a sampling machine for the corrugated board as standard to A flute and other optional flutes. The sample is then taken to be tested to determine the compressibility strength using the C.C.T. (Corrugated Crush Test) & the C.M.T. (Corrugating Medium Test) CWY-01 Concora Medium Fluter can produce 0.5 inch (12.7 mm) wide samples. The two corrugating discs inside have a good heat distribution, which is essential for forming the correct groove.

Principle

After turning on the temperature setting, wait for the disc temp. to reach the set value.  Then put the sample from the top, and the corrugated sample will come out from below.

The sample is matched with the corresponding CMT rack and comb or CCT sample holder. Then the sample is analyzed by a high-precision compressive strength tester.

Benefits 

1. Rugged and durable equipment

2. The different corrugating discs can be replaced

3. Adjustable pressure range and it can be calibrated

4. Vertical design simplifies sample feeding

5. Built-in heating inside the discs means faster and uniform temp distribution.

6. Precise temperature control

7. The space-saving design.

Standard

CMT: ISO 7263, TAPPI T843, EN ISO 7263-1, GB/T 2679, QB/T 1061

CCT: ISO 16945, TAPPI T843, GB/T 40168

Main Parameters