High-Capacity 60MW Full-Scale Solar Module Assembly Equipment

Turnkey solution

Compatible size

a. standard length 1640-2200mm,width 950-1200mm;

b. other specs customized

Compatible module

a. 5BB，MBB，IBC，MWT，HJT，N-TYPE

b. full-cell，half-cut，shingling

c. framed，framed（no C side），frameless

d. glass-backsheet，dual-glass/bifacial，ultra-light，thin-film module

How to build a solar plant?  Many customers have this idea, but they don't know what machine they need, so the project did not start.

So, What Machines are Included in 60MW Full Automatic Solar Panel Making Machines

2. How To Make 60MW Full Automatic Solar Panel Making Machines:
Step 1: Solar Cell Testing
            Use solar cell tester to test the electrical performance of Mono-Si or Poly-Si solar cell pieces and record the results in files.
Step 2: Solar Cell Cutting
           Use solar cell cutting machine to cut solar cell into half piece or 1/3 piece,which can increase the output of the solar panel power.
Step 3: Solar Cell Welding & Tabbing
             Use tabber and stringer machine to solder the mono-Si or poly-Si cells into a string.
Step 4: Glass Loading
Step 5: EVA Cutting & Layup
Step 6: Solar Cell Strings Layup
            Achieve solar string laying on glass EVA, and transporting solar module to the next process.
Step 7: Bussing
            Connect the bus bar
Step 8: Taping
            Tape solar cells
Step 9: Second EVA and Backsheet Cutting & Layup or Glass Loading
Step 10: Insulation
              Need to isolated bus bar leads
Step 11: Visual inspect & EL defect test
              Check the dirty for the raw materials & Uses the EL tester machine to identifying micro-cracks, broken finger wires, and other invisible defects in solar modules
Step 12: Taping
              If making bifacial solar panels, need to wrap around it with tape after the EL
Step 13: Lamination
              Use solar panel Laminate the raw material into solar panel
Step 14: Tearing tape
              If making bifacial solar panels, also need to tear the tape wrapped in Step12
Step 15: Trimming
             When solar panel get cooling after coming out from laminator, it need cutting the edges, we call trimming
Step 16: Flipping inspection
Step 17: Framming
Step 18: Install junction box
              First glue the junction box, then install it on the solar panel
Step 19: Junction box potting
              Fill junction box with glue
Step 20: Curing
              Put solar panel on the curing line to cure
Step 21: Clean the surface
Step 22: IV test
             Use solar simulator to test the finished solar panel Electrical performance test like power, current etc and record
Step 23: Test the panel withstand voltage insulation
             Use a withstand voltage tester to test the panel withstand voltage insulation
Step 24: EL defect test
             Uses the EL tester machine to identifying micro-cracks, broken finger wires and other invisible defects of finished solar modules
Step 25: Label
Step 26: Sorting
              According to solar module power classification
Step 27: PackageStep 25: LabelStep 26: Sorting

According to solar module power classification

Step 27: Package