- Pego Electronics (Yi Chun) Company Limited
-
Yichun, Jiangxi, China
- Main products: ip waterproof testing machine, flammability tester, withstand voltage tester, ik impact test apparatus, iec test probes, electrical safety tester, emc generator, integrating sphere
Home > Products > Standard Test Vessels > EN60350-2 Figure Z1 Stainless Steel Vessels for Cookware
EN60350-2 Figure Z1 Stainless Steel Vessels for Cookware
- 100 Piece / Pieces per Month
- Shenzhen
- T/T PayPal
- 10 days
You May Like
-
IEC EN 60350-2 Figure 4 Low Carbon Steel Test Saucepan
-
IEC60335-2-6 figure 101 Aluminum vessels for testing hotplates
-
IEC60335-2-6 figure 102 Carbon Steel Vessels for testing induction hotplates
-
GB30720 Standard Aluminum Pans for Domestic Gas Cooking Appliance
-
IEC60335-2-6 Clause 21.102 1.8KG Loaded Test Vessel
-
IEC60335-2-9 Figure 102 4.5KG Test Load for Testing Rotating Spits
Product Details
| Brand Name | Pego | Place of Origin | China | |
| Model Number | PG-SSV |
Product Description
EN60350-2 Figure Z1 Vessels for Cookware
1. Introduction
The vessels are designed according to EN60350-2:2013 figure Z1, the side wall of the vessel is made of 1.4301 stainless steel (stainless steel AISI 304) with thickness 1mm±0.05mm, the bottom of the vessel is made of 1.4016 stainless steel (stainless steel AISI430) with thickness 6mm±0.05mm, the cookware is cylindrical without handle or protrusions. And the lid is made of aluminum, and thickness is 2mm±0.05mm, each hole circle of the lid has a diameter of 16mm±0.1mm, the holes shall be evenly distributed on the hole circle. The lid is flat and can accommodate a temperature sensor in the center.
2.Size of the standardized cookware, lids and water account
Diameter of the cookware bottom (outside) mm | Diameter of the lid mm | Lid hole circle diameter mm | Number of holes on the circle | Total cookware height (outside) mm | Flatness of cookware bottom mm | Water load g | Cooking zone size category mm | Standardised cookware categories |
120±0.5 | 130±1 | 80±1 | 7 | 125±0.5 | ≥0 <0.075 | 650 | ≥100 <130 | A |
150±0.5 | 165±1 | 110±1 | 11 | 125±0.5 | ≥0 <0.075 | 1030 | ≥130 <160 | |
180±0.5 | 200±1 | 140±1 | 16 | 125±0.5 | ≥0 <0.075 | 1500 | ≥160 <190 | B |
210±0.5 | 230±1 | 170±1 | 22 | 125±0.5 | ≥0 <0.1 | 2050 | ≥190 <220 | C |
240±0.5 | 265±1 | 200±1 | 29 | 125±0.5 | ≥0 <0.1 | 2700 | ≥220 <250 | |
270±0.5 | 300±1 | 230/210a±1 | 18/18a | 125±0.5 | ≥0 <0.15 | 3420 | ≥250 <280 | D |
300±0.5 | 330±1 | 260/210a±1 | 23/22a | 125±0.5 | ≥0 <0.15 | 4240 | ≥280 <310 | |
330±0.5 | 365±1 | 290/270a±1 | 27/27a | 125±0.5 | ≥0 <0.15 | 5140 | ≥310 ≤330 | |
a Number of holes are arranged on two hole circles | ||||||||
Contact Us
- Pego Electronics (Yi Chun) Company Limited
- Contact namePenny Chat Now
- Phone86-0795-3560528
- AddressNo. 429, Yichun South Road ( Happiness Park), Yuanzhou District,, Yichun, Jiangxi
Product Categories
New Products
-
EN30-1-1 Standard Aluminum Sauce Pans for Testing on Gas Burners
-
IEC60884-1 Clause 22 figure 18/19 Maximum and minimum withdrawal force Test Apparatus
-
IEC60884-1 Cold Bend Test Apparatus
-
IEC60884-1 Figure 20 Apparatus for Cord Retention Testing
-
IEC 61032 Test Probe A with 50mm Steel Sphere and Nylon Handle
-
IEC 60529 Jointed Finger Probe for IP2X Testing
-
IEC 61032 Test Probe C with 2.5mm Rod
-
IEC 60529 IP4X Test Probe with 1.0mm Test Wire
-
IEC 61032 Test Probe 2 with 12.5mm Test Sphere
-
IEC 62262 IK01 to IK10 Pendulum and Vertical Impact Test Apparatus
-
IEC 6068-2-75 IK01 to IK11 Pendulum Impact Hammer Testing Machine with 2J to 50J Impact Hammer
-
IK01 to IK06 Pendulum Impact Test Apparatus for Plug Socket-outlet and Coupler
-
IEC 60068-2-75 Spring impact hammer for IK01-06 Impact Test
-
IK07 Single Spring Hammer for 2J Impact Testing
-
IEC 60068-2-75 Affordable IK07-11 Manual Release Vertical Impact Hammers
-
IEC 60068-2-75 62262 IK07-IK10 Striking Elements for 2J, 5J, 10J and 20J
-
IEC 60068-2-75 IK07-IK10 Vertical Impact Hammer Testing Machine
-
IEC 60068-2-75 IK08 5J Spring Impact Hammer
-
IEC 60598-1 and IEC 60950-1 Impact Test Device with a Steel Ball
-
IEC 60068-2-75 Spring Hammer Calibration Device
-
IEC 60068-2-75 Annex B.3 Figure B.5 Spring Hammer Calibration Device Calibrator
-
IEC60598-1 Diameter of 50mm Steel Impact Ball
-
IEC 60695-10-2 Ball Pressure Test Apparatus for Heating Resistance Testing
-
IEC 60529 IP5X and IP6X Sand and Dust Test Chamber for Testing Led Lamps and Street lights
Popular Searches
- pressure vessel
- mixing tank
- stainless steel tank
- Carbon Steel
- reactor
- tank container
- stainless steel kettle
- Pipe Fittings
- end cap
- tank head
- head plate
- High Pressure Vessel
- Reactor Vessel
- Storage Vessel
- Reaction Vessel
- Filter Vessel
- stainless steel autoclave
- mixing vessel
- Storage Tank Vessel
- Fermentation Tank Vessel
- conical head
- Membrane Vessel
- heat exchanger
- water tank
- pressure vessel
- stainless steel tank
- motor boat
- fishing boat
- Chemical Equipment
- storage tank
Recommended Products
- 300kN-2000kN 4-column Computer Electro-Hydraulic Servo Universal Tensile Tester WAW-B
- 30 ton 60 ton Materials Physicals Testing Equipment usage Hydraulic Universal Testing Machine WAW-B
- 600kN Material testing machine usage servo-hydraulic testing machines WAW-600B
- 600kN WAW-600B 60 ton Universal Testing Machine / Tensile Testing Machine for steel bar rebar
- China Manufacturer Supply WAW-600B 600kN Electro-hydraulic Universal Tester
- auto test equipment for tensile compression strength test
- 600kN Hydraulic universal testing machine peel strength testing machine WAW-600B
- UTM hydraulic universal testing machine used concrete specimen poisson ratio tester
- WAW-600B 600kN compressive strength and elastic modulus testing machine for rock core specimens
- UTM / TTM / tensile testing machine / lab test equipment 600kN (WAW-600B)
- WAW-1000B bending test using utm universal testing machine with OEM factory price
- 1000kn Metal Materials Electro-hydraulic Servo Universal Tensile Testing Machine Steel Tube Tensile Testing Machine
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
Product Tags:
Pego Electronics (Yi Chun) Company Limited
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Penny
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile