Trane air conditioning centrifuge pumping device

Trane three-stage centrifugal pumping device three-stage centrifugal exhaust device automatic pumping device

The price of this equipment is for a complete set of brand new imported original products.

The extraction device of the Trane three-stage centrifuge is a complex system, as the unit is in a negative pressure state. Its function is to promptly remove air and non condensable vapors from the system. According to its functions, it can include the following subsystems: refrigeration subsystem, extraction chamber, extraction subsystem, carbon box, and regeneration system. The composition of these subsystems and their components is shown in Figure 4 EarthWise ?  This is indicated in the layout diagram of the exhaust device. Specifically, the exhaust device includes but is not limited to the following components:

The liquid temperature sensor in the suction chamber is used as the temperature sensor for the chiller control system. ?

The temperature sensor for operating the exhaust chamber is only available for the subsequent installation of the exhaust device in the unit. ?

DynaView control panel and main processor (only available for subsequent installation of exhaust devices in the unit). ?

Dry filter. ?

Liquid level sensor. ?

Compressor suction temperature sensor. ?

Carbon box temperature sensor. ?

Expansion valve. ?

Evacuate the current limiter. ?

Evacuate the solenoid valve. ?

Exhaust solenoid valve. ?

Exhaust pipe pressure relief device. ?

Regenerative solenoid valve. ?

Cable holes for connecting pipes of the condenser of the chiller unit. ?

Gas and liquid interfaces from the chiller unit. ?

There are three types of pumping modes: automatic, manual, and adaptive.

The control systems are UC800 and CH530.