IEC60601-1 Test Probe Kits includes Jointed Finger Probe Test Probe 13, Test Hook and Ball Pressure Test Apparatus

Standard test finger (test probe B)

IEC60601-1 clause 5.9.2.1 and figure 6

IEC60950-1 figure 2A

IEC61032 figure 2

Purpose:for identifying the accessible parts of ME EQUIPMENT

Specification:

1). Diameter of dactylogryposis: Φ12mm

2). Length of dactylogryposis: 80mm

3). Diameter of baffle. Φ50mm

4). Length of baffle: 100mm

Straight unjointed test finger with 30N force

IEC60601-1 clause 5.9.2.1

IEC60950-1 clause 2.1.1.1

Purpose: for verifying the openings preventing the entry of the standard test finger

Specification: the size is as same as test probe B, but without joints, 30N force is applied.

Test Hook

IEC60601-1 figure 7

IEC60065 clause 9.1.7 and figure 4

Purpose: for verifying the openings of ME EQUIPMENT in question

Specification:

1). Length: 180mm

2). Width: 8mm

3). Length of hook: 5mm

4). Thickness: 1mm

5). Material: SUS304 stainless steel

Test Rod

IEC60601-1 clause 8.4.2 d)

Purpose: for verifying the opening of internal parts that can be touched

Specification:

1). diameter: 4mm

2). Length: 100mm

3). Material: metal rod, nylon handle

4). Recommend force applied: 0N, 10N

Test pin (test probe 13)

IEC60601-1 clause 8.4.2 d) and figure 8

IEC60950-1 figure 2B

IEC61032 figure 9

Purpose:  for verifying the opening of internal parts that can be touched

Specification:

1). Diameter: Φ3mm (head), Φ4mm (tails)

2). Length of probe: 15mm

3). Diameter of baffle: Φ25mm

4). Thickness of baffle: 4mm

Ball Pressure Test Apparatus

IEC60601-1 clause 8.8.4.1 and figure 21

Purpose: for verifying the insulation of ME EQUIPMENT resistance to heat

Specification:

1). Ball diameter: 5mm (R2.5mm)

2). Test Pressure: 20N±0.2N

3). Material: Stainless Steel

4). Sample supportor: Φ50mm-length 100mm, cylinder sharp (configure with a hole to insert thermocouple)