- Pego Electronics (Yi Chun) Company Limited
-
Yichun, Jiangxi, China
- Main products: ip waterproof testing machine, flammability tester, withstand voltage tester, ik impact test apparatus, iec test probes, electrical safety tester, emc generator, integrating sphere
Home > Products > Electrial Safety Tester > IEC60335-1 Clause 22.16 Automatic cord reel testing machine
IEC60335-1 Clause 22.16 Automatic cord reel testing machine
- Guangzhou
- T/T
- 25 days
You May Like
-
ISO 11925-2 Building Material Flammability Tester
-
IEC60335-1 Cord Anchorage Pull Force and Torque Tester
-
IEC 60335-2-3 Clause 22.105 Cordless Kettle Withdrawn Life Test Equipment
-
IEC 60335-2-23 Clause 3.1.9 Test Device for Testing Helmet-Type Hairdryers
-
IEC 60598.1 Annex D Draught-proof Enclosure
-
IEC 60332-1 Single wire and Cable Vertical Flammability Test Apparatus
Product Details
| Brand Name | Pego | Place of Origin | China | |
| Model Number | PG-ACR | Power | Electronic |
Product Description
1. Introduction
The automatic cord reel testing machine is designed according to IEC60335-1 clause 22.16. It is applied to check if the cord reel construction of household and similar electrical appliance will cause: 1) undue abrasion or damage to the sheath of the flexible cord. 2). breakage of conductor strands. 3). Undue ware of contacts. The automatic cord reel testing machine adopts multi-function fixture and large work plate, it can test up to 300cm reel, the test speed can be adjusted at the range of 1 to 40 times/min.
Test principle:
Two-Thirds of the length of the cord is unreeled. If the withdrawable length of the cord is less than 225cm, the cord is unreeled so that a length of 75cm remains on the reel. An additional length of 75cm of the cord is then unreeled and pulled in a direction so that the greatest abrasion occurs to the sheath, taking into account the normal position of use of the appliance. Where the cord leaves the appliance, the angle between the axis of the cord during the test and the axis of the cord when it is unreeled without substantial resistance is approximately 600, the cord is allowed to be recoiled by the reel. The test is carried out 6000 times at a rate of approximately 30 times/min or at the maximum rate allowed by the construction of the cord reel if this is less. After this test, the cord and cord reel are inspected.
2. Parameter
Test speed | 1~40 times/min (adjustable) |
Test times | 0~9999 (The test will stop automatically after the specified number of test times) |
Test Angle | 300~700 (adjustable) |
Drive way | pneumatic |
Working air source (Air compressor) | 5~7kg/cm2 (prepared by user) |
Fixture | Customized according to specimen |
Working plate | Size: 600mm*600mm (customized) |
Working plate lifting height | 0-350mm (adjustable) |
Stretching stroke | Max. 1000mm (adjustable) |
Working power | 220V/50Hz |
Contact Us
- Pego Electronics (Yi Chun) Company Limited
- Contact namePenny Chat Now
- Phone86-0795-3560528
- AddressNo. 429, Yichun South Road ( Happiness Park), Yuanzhou District,, Yichun, Jiangxi
Product Categories
New Products
-
IEC 60695-2-10 Glow-Wire Flame Test Apparatus with K type Thermocouple
-
IEC 62368-1-2018 clause 8.8 Handle Strength Test Apparatus
-
IEC60335-2-17 clause 21.111.1 Heating Elements and Internal Wiring Flexing Test Equipment
-
IEC 60587 High Voltage Tracking Test Apparatus with 10KV Test Voltage
-
IEC60695-11-5 Needle flame Tester with K Type Thermocouple
-
IEC60112 PTI and CTI Tracking Index Test Apparatus with Platinum Electrodes
-
UL94 Horizontal and Vertical Flame Test Apparatus
-
IEC 60335-2-2 Clause 21.103 Current-Carrying Hose Flexing Test Apparatus
-
IEC 62560 Bending Moment Test Device for Testing Lamp
-
IEC 60335-2-17 Blankets Mechanical Strength test Apparatus
-
IEC 60811 Cable Sheaths Indentation Testing Device
-
IEC 60335-2-2 Current-Carry Hoses Abrasion Test Apparatus
-
IEC 62368-1 Handle Strength Test Apparatus
-
IEC 60950 High Current ARC Ignition Test Apparatus
-
IEC 60598-1 Tumbling Barrel Testing Machine
-
IEC 60598-2-20 Lab Equipment Lighting Chains Pressure Test Device
-
IEC 60601-1 Lab Testing Machine Residual Voltage Tester with 250V Output Voltage
-
IEC 60335-2-17 Spark Ignition Test Apparatus for Flame Resistance Test
-
IEC 60335-2-15 Spillage Test Apparatus for Testing Kettles
-
IEC 60335-2-75 Oven Splash Test Apparatus
-
EFT Generator Capacitive coupling clamp
-
IEC61000-4-4 EFT-5K16 EFT immunity measurement with 5KV Output Voltage
-
IEC61000-4-2 20KV Output Voltage Electrostatic Discharge Generator
-
IEC61000-4-5 Lightning Surge Generator with 6KV Output Voltage
Popular Searches
- digital tester
- Resistance Tester
- electrical instrument
- test instrument
- lab equipment
- analysis instrument
- laboratory instrument
- Asphalt Mixture Mixer
- launch x431 master
- x431
- Gloss Meter
- Resistance Meter
- digital instrument
- dc load bank
- testing equipment
- testing machine
- battery load bank
- Circuit Tester
- Impact Tester
- lab instrument
- weather station
- gps receiver
- laboratory instruments
- test equipment
- laboratory equipment
- electronic timer
- electronic meter
- electronic instrument
- Electricity Meter
- data collector
Recommended Products
- Handheld ultrasonic concrete crack scanner Ultrasonic testing for hidden cracks in concrete Real-time concrete crack monitoring system
- Automated crack mapping with UPV Best ultrasonic crack detector for concrete Price of portable UPV crack measurement tool
- Time-of-flight (TOF) crack depth measurement Surface wave testing for crack detection Digital ultrasonic concrete testing device
- Tunnel & dam crack inspection with UPV Building structural crack assessment tool Ultrasonic pulse echo for concrete cracks
- Bridge inspection ultrasonic crack detector Concrete slab crack measurement equipment Highway pavement crack depth analyzer
- Portable ultrasonic concrete crack gauge Non-destructive ultrasonic crack depth tester Concrete crack width and depth measurement tool
- Ultrasonic concrete crack depth meter Ultrasonic pulse velocity (UPV) crack detector NDT ultrasonic crack measurement device for concrete
- Handheld device for measuring surface cracks Automated crack detection system for quality control Real-time crack monitoring equipment
- High-precision ultrasonic crack detector price Compare crack width measurement systems NDT crack detection equipment suppliers
- 3D scanning for crack depth analysis Best crack depth measurement device for industrial use Affordable portable crack inspection tool
- Time-of-flight diffraction (TOFD) crack measurement Laser-based crack width measurement Digital microscope for crack analysis
- Metal fatigue crack testing device Railway track crack inspection equipment Phased array ultrasonic testing (PAUT) for cracks
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
Pego Electronics (Yi Chun) Company Limited
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Penny
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile