- Dongying zhaoxin Industry and Trade Co.,Ltd
- Main products: oil packer , torque anchor, sucker rod centralizer, gas anchor, coupling, washover pipe, polished rod clamp, tubing drain, tubing anchor, sucker rod roller /tubing centralizer, thread protector for oil pipes, sucker rod
Home > Products > bridge plug > Fishing-Type Retrievable Composite drillable Bridge Plug For Oil and Gas
Fishing-Type Retrievable Composite drillable Bridge Plug For Oil and Gas
Negotiable
/ Piece
1 Piece(Min.Order)
- Tianjin or Qingdao or as client's requirement
- T/T
You May Like
-
API Drillable Composite Bridge Plug for oil drilling ang gas
-
oilfield API Drillable Composite mechanical Bridge Plug with Wireline set
-
Oil complection casing centralizer
-
API Steel Solid Rigid Casing Centralizer with Straight/Spiral Vane Optional for Oil and Gas
-
Enhance Wellbore Integrity with High-Performance 10D API Rigid Spiral Casing Centralizer
-
API 13 3/8" Non Welded Bow type Casing Centralizer
Product Details
| Place of Origin | China | Condition | New |
Product Description
Products Description
The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction
Working principle
The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps
Drilling out
Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately.
Specification
Related Products
Company Information
Dongying Zhao Xin Industry and Trade Co., Ltd. was established in 2001. Our company is located in Dongying city which has the second largest Oilfield (Shengli Oilfield) in China. We are a company, which conducts scientific research, development, manufacture, sale and after sale service, is one enterprise for oilfield tool and equipment manufacturer. Our main products include drilling equipment, oil production equipment, oil well service tools. Currently, our products are already exported to North America, South America, Middle East, Middle Aisa, India and other countries and regions. We are an I S O 9 0 0 1, I S O 1 4 0 0 1, I S O 4 5 0 0 1,API certified company and have all the quality systems in place for design, planning, manufacturing and quality monitoring & traceability to ensure that all products match the quality & reliability Standards. We also have an independent measurement and inspection department, the inspection and measuring tools are fully equipped, we control each process to ensure that all products are qualified. Dongying Zhaoxin Industry and Trade Co.,Ltd with perfect attitude, product and service, is going to make further development together with customers at home and abroad .
Customer Photo
Our Services
Packaging & Shipping
Certifications
Any problem about our products , welcome here .
Contact person :Alisa
Mobile/Whatsapp : +86 13706368719
Contact Us
- Dongying zhaoxin Industry and Trade Co.,Ltd
- Contact nameAlisa Ma Chat Now
- Phone86-137-06368719
Product Categories
New Products
-
API double plug cementing head cementing tools for casing
-
Oilfield double/single plug casing cement head for cementing equipment
-
API 7K Single Pulg/Double Plug Cement Head For Cement
-
Oilfield Tools API 5CT double dual single plug cementing Head
-
Oilfield cementing tool cement head for drilling rig
-
Oil complection float shoe/float collar for oilfield
-
Oil and Gas Well Butt-weld Float Collar and Float Shoe for Cementing Tools Complied with API
-
API casing 6-5/8" float shoe and float collar oil drilling
-
Fig1502 1 " 2" 3 " FMC long sweep swivel joint Weco Chiksan for Oilfield
-
API 16C Best Selling forged high pressure straight pipe chiksan swivel loop hammer union oilfield steel pipe pup joints
-
High Pressure Drilling Active elbow 35Mpa Annular Pipe Manifold API 16C FMC long sweep swivel joint short Loop manifold
-
High Pressure H2S Swivel Joint Chiksan Swivel Joint for Oilfield
-
API Fittings Chicksan Loop with swivel joints 2" X 12Ft FIG1502 hammer union CEMENTING & CIRCULATING HOSE
-
chiksan swivel joints 50 1 " 2" 3 " Fmc Swivel Joint 2 Chiksan For Drilling
-
API 6A High Pressure Long Radius Swivel Joints Style 30 FemaleXMale
-
High Pressure Manifold Chiksan Swivel Joint
-
Hydraulic composite frac drillable bridge plug/cement retainer for oilfield
-
downhole tool API Wireline mechanical composite bridge plug
-
2"X10'MANGUERA LOOP INTEGRAL MxF FIG
-
2"X10 MANGUERA LOOP INTEGRAL MxF FIG.1502 (FMC)15 KSI STD/2"ADAPTADOR INTGRAL FxF FIG.1502 (SSI)15KSI STD
-
DTH Hammer Drill Bit Mining Button Bit Rock Drilling Tools Middle Air Pressure DTH Drilling Bit
-
DTH hammer drill bit Low Air Pressure Rock Drill Bit cir For Well Drilling Machines
-
DTH hammer button drill bit
-
Drillable Composite bridge plug for oilfield
Popular Searches
Recommended Products
- API casing 6-5/8" float shoe and float collar oil drilling
- Oil and Gas Well Butt-weld Float Collar and Float Shoe for Cementing Tools Complied with API
- Oil complection float shoe/float collar for oilfield
- Oil well drill pipe/drill collar/water well drill pipe/drill rod
- HDPE casing/tubing/drill pipe thread protector
- API 6A Riser Spool Crossover and Spacer Spool for Oil Drilling
- Oil wellhead API 6A Spacer Spools/Manual Actuated (Wheel) Gate Valve
- API 6A Hydraulic actuated Gate Valve for oifiled
- API 6A adapter spool/gate valve manfacturer
- API 6A Riser Spool/Crossover for oilfield
- Polished rod clamp for oifield
- Oil drilling and gas wellhead polished rod clamp
Find Similar Products By Category
- Manufacturing & Processing Machinery > Petroleum Equipment & Machinery > Pumping Unit
Dongying zhaoxin Industry and Trade Co.,Ltd
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Dongying zhaoxin Industry and Trade Co.,Ltd
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Alisa Ma
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile