Home > Products > Gyro Sensor > High Accuracy Single-Axis MEMS Gyro
High Accuracy Single-Axis MEMS Gyro
- 9999 Piece / Pieces per Month
- Dalian
- T/T L/C D/P D/A
You May Like
Product Description
Introduction
ER-MG-057 is a single-axis MEMS angular rate sensor (gyroscope) capable of measuring angular velocity up to a maximum of ±400°/s with digital output compliant to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word.
ER-MG-057 is intended for industry, instrumentation, stabilization, and other high performance applications. An advanced, differential sensor design rejects the influence of linear acceleration, enabling the ER-MG-057 to operate in exceedingly harsh environments where shock and vibration are present.
ER-MG-057 is available in a hermetically sealed ceramic LCC surface mount package, and is capable of operating at 5V supply and a wide temperature range (?45°C to +85°C).
Features
Proven and robust silicon MEMS gyro
Up to ±400°/s measurement range
1°/hr bias instability
0.2°/√hr Angular Random Walk
Digital output (SPI slave)
5V operation (4.75~5.25V supply)
Low power consumption (35 mA)
High shock and vibration resistance
Hermetically sealed ceramic LCC surface mount package (11 x 11 x 2mm)
Integrated temperature sensor
RoHS compliant
Application
Precision instrumentation, stabilization
Guidance, navigation, control
Avionics, unmanned vehicles
Precision autonomous machines, robotics
Specification
Input Range | 400 | dps |
Bandwidth | 200 | Hz |
Data Output Rate | 2K | Hz |
Latency | 2 | ms |
Scale factor | 20000 | LSB/°/s |
Scale factor non-linearity | 200 | ppm |
Scale factor temp drift(1б) | 500 | ppm |
Bias temp drift (1б) | 50 | dph |
Bias temp drift (1б) (After Temp compensation) | 10 | dph |
Bias instability | 1 | dph |
Bias stability (1б 10s) | 4 | dph |
Bias stability (1б 1s) | 12 | dph |
Run to Run Repeatability | 4 | dph |
RMS Noise (1-200Hz) | 0.1 | dps |
Random walk (ARW) | 0.2 | °/√h |
Start up time | 0.8 | s |
G-sensitivity | 5 | dph/g |
VRC | 0.5 | °/h/g2rms |
Shock | 12g | Rms |
Vibration | 1000g 5ms 1/2 sine | / |
Operation Temperature | -45--85 | ℃ |
Contact Us
- Shaanxi Ericco Inertial System Co., Ltd
- Contact nameRoro Yang Chat Now
- Phone86-29-88767351
- AddressGaoxin District, Xi'an, Shaanxi
Product Categories
North Seeker | Gyro Sensor | Accelerometer | Tilt Sensor |
Quartz Accelerometer | IMU | electronic compass | MEMS INS |
New Products
-
Low cost GNSS aided MEMS Inertial Navigation System
-
High-precision MEMS Integrated Navigation System
-
Cost Effective Attitude Control MEMS IMU
-
High Performance Dynamic FOG North Seeker
-
Economical MEMS North Seeker
-
Cost-Efficient Triaxial MEMS North Seeker
-
Dual Axis MEMS Gyroscope
-
Economical MEMS Gyroscope
-
High Accuracy MEMS Accelerometer
-
Low Cost 3 Axis FOG North Seeker
-
High Precision Wireless Transmission Tilt Sensor
-
High Performance Wireless Transmission Tilt Sensor
Popular Searches
- digital compass
- gyro
- inclinometer sensor
- inclinometer
- tilt angle sensor
- angle sensor
- digital inclinometer
- tilt sensor
- digital sensors
- Tilt Switch
- digital tilt meter
- digital angle sensor
- gyroscope sensors
- digital gyroscope
- pressure sensor
- pressure transducer
- flow meter
- Magnetic Stirrer
- agitator
- quartz wafer
- Fused Silica
- gas sensor
- electromagnet
- stirrer
- operating temperature
- current
- navigation system
- Sensor Module
- acceleration sensor
- attenuator
Recommended Products
- Factory direct sales of 1000kva, 500kva, 400v to 22kv, 20kv, 33kv step-up three-phase transformer, oil price, power transformer
- Microrectangular connector J30J-5TJL-300MM J30J-5ZKP-300MM
- Automotive specification products
- New Energy
- Magnetic loop coil
- Surface mount inductor
- iEVLEAD 40KW DC WALL- MOUNTED CHARGER
- Cost Effective Attitude Control MEMS IMU
- EPRO PR6423/000-000-CN 8mm Eddy Current Sensor
- EPRO PR6423/10R-030-CN 8mm Eddy Current Sensor
- EPRO PR6424/003-010 16mm Eddy Current Sensor
- EPRO CON021/913-040 Eddy Current Signal Converter
Find Similar Products By Category
- Manufacturing & Processing Machinery > Manufacturing Equipment for Electrical & Electronic Product > Chip Mounter

Product Tags:
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Roro Yang
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile