Turnkey Project Matte Pp Adhesive Paper With Hot Melt Glue Production Process Stirred Tank Reactor

The manufacturing process of hot melt PSA pillow-shaped involves adhesive formulation, adhesive mixing, and packaging. Raw materials are blended in an adhesive mixing machine to create a uniform mixture. The adhesive is then tested for quality, packaged, and stored. This process ensures the production of high-quality hot melt PSA for various applications.

Products Description

Glue System

1. Raw Material Storage system

2. Reactor

3. Transfer Station

4. Vacuum System

5. Condenser

Raw Material Storage system

1.Inventory Management

2.Temperature and Humidity Control

3.Segregation

4.Proper Packaging

5.Precise Ingredient Control

Reactor

· Mixing and Blending

Raw materials, including polymers, tackifiers, and additives, are mixed and blended in specific  proportions to create the hmpsa  formulation.

· Melting and Heating

The adhesive formulation is then melted and heated to a suitable temperature, typically in a melting system.

Vacuum System

· Deaeration

Some adhesive formulations may require deaeration to remove air bubbles or trapped gases. A vacuum system can be utilized to create a vacuum environment that helps release the air bubbles from the adhesive formulation.

Condenser

· Condensation

The primary purpose of a condenser is to facilitate the condensation of vapors or gases into a liquid state. However, in the production of hmpsa, the focus is on melting solid adhesive formulations and shaping them into the desired pillow-shaped form, rather than dealing with condensation processes.

Transmission system

1.Shape/Packaging System

2.Chiller System

3.Cooling/Conveying System

4. Automatic Packaging System