ABB 5SHY4045L0006 3BHB030310R0001 SCR control unit module

Product model:

ABB

3HAC021724-001

motor

ABB

3HAC024115-001

cable unit

ABB

3HAC024194-003

connection box

ABB

3HAC028357-001

teach Pendant

ABB

3HAC029818-001

power unit

ABB

3HAC041443-003

computer unit

ABB

3HAC16831-1

battery

Business scope:

PLC,DCS,PAC, industrial computer, programming control PC, frequency conversion system, servo system, human-machine interface HMI, transmission and sensing system and other accessories supply, low-voltage electrical appliances, electrical connection, panel cabinet, power supply, industrial safety SCADA, automation software, information, industrial Ethernet, fieldbus, field instrumentation, wireless communication, low-voltage inverter, High voltage frequency converter, motion control, mechanical transmission, motor, machine vision, sensor, display control instrument, analytical test instrument.

Product Description:

Measuring range 4... 20 horses

(Passive 2-pole sensor)

The input current exceeds the measuring range

Overflow error message. If the measured value is below

Within this range, an underflow error message is generated.

The input impedance is about 330w. Current input yes

Self-protection mechanism. If the input current

High, shunt off, range value is

Overflow. The device tries about once every second

Switch on the shunt again. In this way, the correct measurement can be made

Will it work after the current reaches a

Return to normal.

The display self-protection mechanism triggered

Red LED light. As long as overload exists. in

The PLC system then stores an error message (FK4);

Error number 4).

Open-circuit monitoring starts below about 3 mA. the

Stores the value of the range underflow. If open

Set monitoring to display open circuit events

Red LED light. As long as it exists. in

The PLC system stores an error message (FK4, error number)

9).

The following diagram shows the connection of 2 passive - poles

Type Analog Sensor 4... 20 horses

After-sales service:

1. The key customer base is an important part of the survival and further development of the enterprise. Through the return visit and communication of the key customers, the customer demand is gradually improved and the customer satisfaction is improved

2 Due to human factors (self-disassembly, fall or external impact, etc.), irresistible factors (such as natural disasters, etc.) improper storage (rats, liquid infiltration, etc.) caused by computer failure, not free warranty service.

3 Damage to electronic components such as chips and capacitors due to voltage, or failure or damage caused by use in working environments other than those specified in the product manual (such as excessively low ambient temperature; The environment is too wet or dry; Voltage or current instability, etc.), not free warranty service.