3BHE004573R0042 Centralized functions

Performance characteristics

*Supports logically independent dual CAN buses, including CAN2.0 A and CAN2.0B, with 32 predetermined communication rates

*DeviceNet and CANOpen buses support manual setting of all standard rates or rate adaptation

*Flexible selection of 1-2 CAN ports and 1-2 155Mbps fiber optic interfaces, supporting redundant dual network and fiber optic ring network topologies

*Fiber optic distance of over 60km, 155Mbps high-speed optical interface better supports long-distance reliable transmission of burst data

*5 dual color LED status indicators, fiber optic link fault and bus data interface fault relay output alarms

*Bus data interface 4000V lightning protection, 1.5 A overcurrent, 600W surge protection, industrial grade design, EMC testing certification

*DC 12-36V wide redundant dual power supply with reverse protection

*IP30 protection level, corrugated aluminum reinforced casing, using standard industrial 35mm guide rail installation method

Bus data interface

*1-2 5Pin terminal interfaces, in accordance with CiA organization's recommendations and ODVA organization's recommendations

*Supports CAN BUS/DeviceNet/CANOpen bus standards

*Communication speed: DeviceNet/CANOpen all rate levels, up to 1Mbps

*Delay: between 100 and 5000us, typical values are 100us/1Mbps, 250us/250Kbps, 5000us/10Kbps

*Equipped with 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection functions

*Terminal resistance: This device does not come with a terminal resistance, please connect it externally as needed

Fiber optic interface

*Fiber wavelength: multimode 850nm, 1310nm, single mode 1310nm, 1550nm

*Transmission fiber: multimode 50/125um, 62.5/125um, 100/140um, single mode 8.3/125um, 9/125um, 10/125um

*Transmission distance: multimode 2km, single mode 20km, longer distance optional

*Fiber optic interface types: SC, FC, ST optional, standard SC optical interface

*Signal delay (optical port): ≤ 2.3us/node

Power supply and protection

*Power supply: Dual power redundant input, DC (12-36 V), typical DC24V, power consumption not exceeding 4W, with reverse protection function, industrial terminal interface (please use industrial standard power supply, otherwise it may cause communication failure or equipment damage)

*Relay alarm output: fiber optic link fault and bus data interface fault alarm output, contact capacity: DC48V/1 A, industrial terminal interface

Contact information: 15359293870

WhatsApp:+86 15359293870

Contact person: KELLY

Email: geabbdcs@gmail.com   386353502@qq.com

Official website: