Dropping Point of Lubricating Grease Tester ISO2176 ASTM D566

This instrument is suitable for detecting the dropping point of lubricating grease. Microcomputer control, automatic testing, automatic results; and accompanied by the experimental process curve.

1. Applicable standard: ASTM D566 ISO 2176 GB/T4929

2. Pressure display: LCD digital display

3. Temperature control accuracy: �u0.1�?/span>

4. Heating method: electric heating tube heating

5. Working unit: 2 tubes

6. Machine power: 800W

7. Working power supply: 220V 50Hz

8. Instrument size: 210*220*390mm

9. Net weight: 5KG

1. The glass cylinder is used as the heating bath body, and can be observed transparently;

2. One-piece structure, easy to operate;

3. The grease cup is made of chrome-plated brass, the inner diameter is Φ9.92mm, the drip hole is Φ28mm, and the cup height is 12mm; it meets the requirements of ASTM standards;

4. Two samples can be tested at the same time, which is convenient for parallel samples;

5. The heating power can be adjusted arbitrarily;

6. There is a stirrer on the electronic heating bath;

7. Stainless steel heater;

8. The voltmeter shows the heating status;

9. The shell is made of cold-rolled steel plate, and the surface is treated by electrostatic spraying, which has good rust resistance and is easy to clean;

10. Safety facilities to prevent overheating and low water level;

11. It is very convenient to contact the control box.