High Thermal Conductivity Silicate Carbon SiC Refractories Silicon Carbide Refractory Bricks

Silicon Carbide Bricks 

Introduction

Silicon Carbide Bricks, (also called silicon carbide refractory brick or silicon carbide firebrick) is a kind of refractory material made of SiC as the main raw material. The silicon carbide content is from 72% to 99%. Generally, black silicon carbide (SiC content above 96%) is used as the raw material, and the binder (or no binder) is added, and then it is prepared by batching, mixing, molding, and firing. The main crystal phase is silicon carbide. Silicon carbide refractories are mainly divided into several types of clay bonding, Si3N4 bonding, Sialon bonding, β-SiC bonding, Si2ON2 bonding, and recrystallization. It is stable to acidic slag and has good wear resistance, corrosion resistance, high-temperature strength, good thermal shock stability, high thermal conductivity, and low thermal expansion coefficient. They are high-performance refractory materials.

The silicon carbide brick is made of black SiC raw material. The main crystal phase is SiC. The silicon carbide brick is formed by matching the binding agent, mixing, molding, and firing process. The moth hardness of silicon carbide brick is 9.

The silicon carbide castables do not weaken on heating and display superior operational properties: the compressive strength is 40–80 MPa at sintering temperature 400°C and 50–85 MPa at 1300°C, the strain onset temperature under a load of 0.2 MPa is 1700–1510°C; thermal stability (1300°C - water) is better than 45 heating/cooling cycles (1300°C - water); no change in linear and volume dimensions was observed on heating. The newly-developed castables can find application in various sectors of industry, in particular, as the refractory material for the lining of Whiting furnaces and porcelain kilns.

In view of its high mechanical strength and abrasiveness over a wide temperature range, SiC is used extensively in the production of silicon carbide refractories. 

Silicon carbide refractories have high physicomechanical properties and endurance, high mechanical strength, and resistance to deformation at high temperature, and as a result of the absence of polymorphic transformations, it has a low linear thermal expansion coefficient (LTEC) and high thermal conductivity.

Silicon carbide refractories are mainly manufactured from granular semidry or plastic mixes by compaction, ramming, or stretching.  In industry, there is extensive use of silicon carbide based on silica, high-alumina, argillaceous and nitride binders.

Properties

1. The more SiC content, the better the alkali resistance
 2. Silicon carbide in silicon carbide castables is especially advantageous at high temperatures (1100 ℃).
 3. Produce partial gaps around the SiC particles to improve the thermal shock resistance and strength of the refractory castable.
 4. The important chemical properties of silicon carbide are oxidation resistance, corrosion resistance, and the first reaction. When heated to 1000 ° C, the surface of SiC is oxidized and a SiC 2 film is formed. This film hinders the diffusion of oxygen, delays the oxidation rate, protects the silicon carbide covered by the film, and improves the service life of the silicon carbide material.
 5. Because the substrate is SIC, silicon carbide is wear-resistant, and silicon carbide has high hardness.
 6. Silicon carbide is widely used in abrasives, heating elements, structural ceramics, and refractory materials due to its high hardness, electrical conductivity, high-temperature resistance, and high strength.

Chemical & Physical Index

Characteristics:

l  Corrosion resistance

l  Good wear resistance

l  High thermal conductivity

l High-temperature strength

l  Good thermal shock resistance

l  Low thermal expansion coefficient

l  Strong corrosion resistance

l  Good anti-oxidation resistance

Application :

Our silicon carbide refractories are widely used as the lining of large aluminum electrolytic cells. The products can also be employed to enlarge the tank capacity, enhance thermal conductivity, allow rapid cooling, and boost the tank production capacity at the same time. Alumina and cryolite of eutectic content on the surface can protect the tank lining work layer, and prolong the tank's service life, therefore, silicon nitride bonded silicon carbide bricks is a welcomed product in the aluminum industry.

Package
For Refractory Castables

 1 ). In 1MT Big Bag
 2 ). 25KG PP Big Bag In 1MT Big Bag
 3 ). customized packing as required

For Refractory Bricks

 1 ) . Wooden pallet wrapped with plastic film and bundled belts.
 2 ). customized packing as required

Package

1 ). In 1MT Big Bag
2 ). 25KG PP Big Bag In 1MT Big Bag
3 ). customized packing as required