3500/40 143488-01 Displacement monitor

3500/40 143488-01

3500/40 143488-01

3500/40 143488-01

3500/40 143488-01 Bentley modules installed or removed when power is applied to the rack

The equipment contained in the 3500/40 143488-01 circuit board is exposed to electrostatic charges. Any damage caused by obvious improper operation will void the warranty. To avoid damage, please comply with

Give orders. Application alarms and external communication devices (DCS, PLC, remote display, etc.) will be lost and removed from the rack.

Do not release static electricity onto the circuit board. Avoid using tools or programs that cause static damage to the circuit board. Some possible reasons include ungrounded soldering iron, non-conductive plastic, and similar materials.

Personnel must use a suitable grounding bus (such as Velostat with 3M number 2060) before handling or maintaining the printed circuit board.

Transport and store circuit boards in conductive bags or foils.

Be extra careful in dry weather. Relative humidity often drops below 30%, causing the accumulation of static charges on any surface to multiply.

When executed correctly, this module can be installed or removed from it

When power is applied to the rack, the rack. Please refer to the rack installation and maintenance manual (part number 129766-01) for the correct steps