Auto zeroing Hot tack Testing Machine

Hot tack is the property of a heat-sealed layer to resist forces that would pull the seal apart while it is still hot. This
property is of vital importance for vertical form fill and seal process (VFFS). HTT-02 Hot Tack Tester measures the strength of heat seals formed between thermoplastic surfaces immediately after the seal has been made and before it cools to room temperature.

Technical Specifications
Sealing Temperature             Ambient~250℃
Temp Accuracy                      ±0.2℃
Heat Seal Dwell Time             0.1~9999s
Hot Tack Dwell Time              0.1~9999s
Sealing Pressure                     0.15MPa~0.7MPa
Sealing Jaws                           50mmx10mm Teflon Coated
Sealing Jaws Heating           Double Heating
Load Cell                                 200N
Accuracy                                 0.5 F.S.
Resolution                               0.01N
Stroke                                       500mm
Gas Source                             0.7MPa
Port Size                                 Ф6mm PU Hose
Power                                       AC220V50Hz

1. Hot tack, peeling and tensile test items are integrated in one instrument.
2. Delta P.I.D. temperature controller used and PT100 temperature sensor
3. 7 inch TFT touching screen for easy operation
4. PLC control unit inside
5. Aluminum encapsulated sealing jaws for average heating
6. Multi-group parameter saving
7. Testing speed adjustable from 1~2000mm/min.
8. Auto zeroing, overload and over travel protection
9. RS 232 port and professional software(optional)