HAWKER LPC24-10 24V/10A Intelligent Charging Station

HAWKER LPC24-10 24V/10A Intelligent Charging Station

Hawk LPC intelligent charging station

Product features This product is designed for automatic guided vehicle/electric forklift and other applications.

The product is composed of basic power module N+1 in parallel, which can meet the maximum power application of 24V240A/48V200A.

The whole machine adopts the controller specially developed for the application requirements of AGV trolley in automatic production line,

Realize logic control, system protection, parameter setting, charger management, upper communication and other functions, and use 7-inch full-color touch screen to realize human-computer interaction.

The system has the following features:

Super power, 240A@24V  / 200A@48V

Hot plug mode, N+1 redundant fabric protection

Ultra-large power density, compact volume

Support current expansion and upgrading

Standard efficiency up to 92%

Multiple use modes (fast charging, interactive charging, balanced charging, maintenance charging)

Provide IO port for system interlocking protection

With industrial communication bus (CAN/MODBUS/PROFIBUS DP)

High protection safety level (IP54), designed for industrial applications

Protection characteristics

● Overheat protection: when the internal temperature of the charger exceeds 75 ℃, the charger will be shut down protectively, and when the temperature drops, it will automatically resume charging.

● Short-circuit protection: when the charger output is unexpectedly short-circuited, the charger will automatically shut down the output, and restart charging after 10 seconds delay after troubleshooting.

● Reverse connection protection: when the battery is reversed, the charging machine will cut off the connection between the internal circuit and the battery, and will not start charging, nor will there be any damage.

● Input low voltage and overvoltage protection: when the input AC voltage is lower than 185V or higher than 265V, the charger will be shut down for protection, and will automatically resume operation after the voltage is normal.

2、 Technical indicators

● Rated input voltage: AC220V ± 15%

● Rated frequency: 45 ～ 65 Hz

● Battery pack voltage: 48V

● Full-load efficiency: ≥ 93%

● Maximum charging current: 100A

● Equalizing and floating charging: automatic completion

● Battery type: lithium iron phosphate battery (the charging program has been set before leaving the factory. If it needs to be set again, it needs to be conducted under the guidance of professional personnel)

● Shutdown mode: automatic, or timing, or automatic shutdown after disconnecting the charging plug

● Cooling mode: forced air cooling

● Display mode: LED digital meter with LED light to indicate charging status

● Mechanical impact and seismic grade: meet the requirements of SAEJ1378

● Protection grade: IP66

● Working temperature: - 5 ℃~+45 ℃

● Storage temperature: - 30 ℃~+70 ℃

● Charging control: temperature compensation control, never overcharge or under-charge

● Connector configuration: ANEN350A

Product specification

Voltage level

24V system

48V system

Model

LPC120-24

LPC180-24

LPC240-24

LPC100-48

LPC150-48

LPC200-48

power

3600W

5400W

7200W

6000W

9000W

12000W

Charging current

5~120A

5~180A

5~240A

5~100A

5~150A

5~200A

input voltage 

220VAC ± 10%, 50/60Hz (optional 380VAC ± 10%)

power factor 

≥ 0.99@220Vac /50A，≥ 0.98@220Vac /25A (single module)

Dynamic adjustment rate

± 5.0% for 10-90% or 90-10% load change, adjustment time<200us

Load regulation

± 0.5% from 10% to 100% load

Charging voltage

16 ～ 30VDC

43 ～ 58VDC

Steady current accuracy

≦ ±0.5%

Noise voltage

<200 mV peak, 30 MHz bandwidth,<2 mV rms telephone weight

Adjustment accuracy

≦ ±0.5%

Time accuracy

≦ ±10S/24h

Charging parameter setting

Voltage

0.01V

Current

0.1A

time

1S

aspect

According to power

weight

According to power

working temperature 

0 ℃ ～45 ℃

Storage temperature

-10 ℃ ～40 ℃

Working humidity

Relative humidity 10%~80%, no condensation

protect

Overcurrent, over-voltage, over-temperature, reverse connection, leakage, short circuit, cut-off

communicate

CAN/MODBUS/PROFIBUS DP optional

Interactive DIO

Dry contact DIO, battery contact notification, standby, charging, charging completion, fault

safety standards

IEC 60950-1

EMC standard

EN 61000-6

environment

ETSI EN 300 019-2 RoHS compliant

Insulation and pressure

3.0 KVAC – input to output 1.5 KVAC – input to ground 0.5 KVDC – output to ground

Mean time between failures

5 million hours

noise

50DB

Hawk charging station is installed on the ground.

Product name: Hawk charging collector

Model: TOPSB-100, TOPSK-100

TOPSB-200、TOPSK-200

TOPSB-200B、TOPSK-200A

Brief introduction: Hawk brush plate brush block can be customized according to installation requirements. Contact Wang Zelong for detailed specifications, models and parameters.

AGV automatic navigation car battery charging system: it has a variety of specifications and models, such as unipolar, bipolar, three-level, four-level, 15A, 20A, 35A, 60A, 80A, 100A, 150A, 200A, 250A, etc. It can be used for lithium battery, lead-acid battery, nickel-hydrogen battery, nickel-cadmium battery and other batteries, and can also be used in the AGV navigation transport vehicle online charging system. The products are widely used in power, railway, communication, logistics automation, national defense, petrochemical Charging system in metallurgy, coal mining and other fields.

HAWKER LPC24-10 24V/10A Intelligent Charging Station

As a transport vehicle or mobile assembly platform, AGV connects all assembly areas on the assembly line. AGV can also be used as a transport vehicle for warehousing, internal logistics, or lifting equipment.

Hawk brush plate brush block is made of imported UPE raw material and T2 red copper

UPE, namely ultra-high molecular weight polyethylene, is an engineering plastic with good comprehensive properties. Its five properties, namely wear resistance, impact resistance, corrosion resistance, self-lubrication and impact absorption, are better among the existing plastics.

HOKE brush TOPSK/SB series products can be customized according to customer requirements or drawings!

Hook side charging mechanism JG series

HAWKER LPC24-10 24V/10A Intelligent Charging Station

Hawk side charging mechanism products are specially developed for online charging of AGV cars, supporting online charging of various types of AGV cars, and forming an automatic charging system with Hawk online intelligent charging station. It can reduce manual intervention in charging, realize intelligent power management, and provide efficient and intelligent power supply solutions for modern storage and logistics systems.

HAWKER LPC24-10 24V/10A Intelligent Charging Station