Yx38-300-900 wall panels

YX38-300-900 wall profiled plate, or YX38-300-900 wall panel, YX38-300-900 profiled plate, YX38-300-900 color steel plate, YX38-300-900 color steel tile, YX38-300-900 Color steel wall panel, YX38-300-900 color coated profile plate, its wave height is 38mm, composed of 3 waves, the distance of each wave is 300mm, the effective coverage area is 900mm, and the color coated plate with a feed width of 1089mm is used. This plate type is widely used in the exterior wall of large steel structure workshop buildings, and the installation effect is beautiful.

The exterior finish of the wall is divided into indoor wall and outdoor wall. Wall decoration is an integral part of architectural design. Modern indoor walls use color and texture changes to beautify the indoor environment, adjust illuminance, and select a variety of materials with easy cleaning and good physical properties to meet the use of various functions.

First, the characteristics of the wall panel

Light weight, equivalent to 1/30 of the brick wall, while the effect of thermal insulation is very good. Secondly, the strength is high, and the bending and compression resistance are especially used in suspended ceilings, partitions and other places. Again, it is convenient, time-saving, and material-saving during the installation process, and it can also be cut at will, and the appearance color is bright and bright is a product in building materials. As a convenient and practical color steel plate, stainless steel wall panel has achieved the goal of high quality, high efficiency, reliability and safety under the premise of meeting the requirements of building thermal insulation, sound insulation and fire prevention, and has been recognized by the majority of users and is an emerging material that is more respected.

2. YX38-300-900 wall material

1. The profiled steel plate is generally cold-rolled from 0.75~1.6mm thick Q235 thin steel plate. The net thickness of the profiled steel plate used for the composite plate (excluding the thickness of the galvanized layer or the finishing layer) is not less than 0.75mm.

2. For the profiled steel plate of the composite board and the non-composite board, the wall panel manufacturer should use galvanized steel plate. The profiled steel plate used as a composite plate, its galvanizing thickness should still meet the requirements of no rust during use.

3. The steel plate and steel beam are bolted steel connected by bolts, which is generally the same as the material of the steel beam connected to them.