IEC / EN 60529 IP2 Protection degree 12.5mm Test Sphere Probe with 50N Force

IEC / EN 60529 IP2 Protection degree 12.5mm  Test Sphere Probe  With 50N Force

According to IEC61032 figure 6、 IEC / EN 60529 standard, object probe for determining the IP2 Code degree of protection of housings against the penetration of solid foreign bodies ≥ 12.5 mm into the equipment.

Technical parameters:

1. Ball diameter: 12.5mm

2. Thickness of baffle plate: 4mm

3. Diameter of baffle: 10mm

4. Handle diameter: 4mm

 Instructions:

1. The ball cannot touch live parts or can not approach dangerous parts.

2. In the test requirements for preventing access to dangerous parts, the test steel ball without thrust should be used with the push-pull force meter, and the steel body should apply 30±3N thrust to the protective layer.

The protection against the ingress of solid foreign objects implies that the object probes up to numeral 2 in the table shall not fully penetrate the enclosure. This means that the full diameter of the sphere shall not pass through an opening, In the enclosure. Object probes for numerals 3 and 4 shall not penetrate the enclosure at all.

Sherry Xu

Tel:+86-0755-21518810

Email:sherryxu@jusdatest.com