10ton 12ton 15ton Automatic Feeding Waste Tyre/Plastic Pyrolysis Machine For Fuel Oil

 10ton 12ton 15ton Automatic Feeding Waste Tyre/Plastic Pyrolysis Machine For Fuel Oil

Material for waste tyre pyrolysis plant

1.Waste rubber tire, waste plastic, waste rubber products, etc.

2.Industrial mixed waste plastic, allowing dozens of waste existing at the same time (such as PP, PE, PVC mix together etc).

3.Waste oil:waste diesel, lube oil, engine oil, waste oil residue, mazut, tar oil, wax oil, waste crude oil etc.

4.Waste cable cover.

5.Waste PMMA(methyl methacrylate)rebirth.

6.Drainage oil, acid oil.

 2.  Pyrolysis plant specification

flow chart and working processing

First, the scrap tyres are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

1.The size for the equipment 
Device itself covers an area of 300 square meters (25 meters long / 12 m wide), and covers an area of raw materials, end products piled up, simply rest area, office area and workers need about 600-800 square meters.
2.Operation personnel quantity:
Artificial feeding: need 3-4 workers
3.Quarantee
Overall quality assurance two years (except wearing parts under normal operation, free maintenance), life-long maintenance. Host the Q245R boiler steel plate, can bear high temperature 700 ℃.

3.The available fuel for pyrolysis processing

 5.  Pyrolysis machine advantage and main technical characteristics

1. High oil output rate 45%--55% with special catalyst formula and high tech .

2. Rapid condensers and large cooling area,assure you get much more and higher quality oil. diversiform cooling system can be choose according to client's willingness

3. Dust-removing device -four levels dust processing system make sure no any population and the output smoking is the spray more environmental protection.

4. Double tail-gas recycling and burning system, saving energy.

5. Q245R boiler plate, high temperature resistance, thickness reaches 14mm—16mm,guarantee 4-7 years service lives. and optional plate is Q345R

6. OptionalAuto feeder and carbon black discharge elevator, high automation, saving time and labors.

7. Eco-friendly and no any population, environmental protection