TPS92638QPWPRQ1 LED lighting driver TI original off the shelf

characteristic

Meet the requirements of automotive applications

Device temperature class 1: ambient operating temperature range from – 40 ° C to 125 ° C

Device HBM ESD classification grade H2

Device CDM ESD classification level C3B

Provide functional safety

Available documents to assist in the design of functional security systems

8-channel LED driver with analog and PWM dimming

Wide input voltage range: 5V to 40V

Adjustable constant output current set by reference resistor

Maximum current: 70mA per channel

Maximum current: 560mA in parallel operation mode

Accuracy: ± 3% per channel

Accuracy: ± 4% for each component

PWM Dimming Input (PWM)

On/off delay: 25 μ s (typ.), 45 μ s (max)

4 groups of PWM dimming functions, which can control 8 channels

Open circuit and short circuit detection of LED through deburring pulse

Fault pins used to report open circuit, short circuit and thermal shutdown faults, allowing up to 15 devices to be connected to the parallel bus

High temperature current turn back function, which can prevent thermal shutdown and has programmable threshold

A resistance for the stop lamp current setpoint

A resistance for the tail lamp current setpoint

Operating junction temperature range: - 40 ° C to 150 ° C

Package: 20 pin heat resistant enhanced PWP package (PDSO)

explain

TPS92,638-Q1 is an eight channel linear LED driver with PWM dimming control function. The design is ideal for driving multiple LED strings to the medium power range.

The device can drive up to eight light strings, each of which can have one to three LEDs, and the total current of each channel is up to 70mA. Multiple outputs can be parallelized to provide up to 560mA of drive current.

In the application of multiple lamp strings, the advantage of this device is that it supports the common cathode connection of LED lamp strings. Therefore, for the system with low-end current sensing function, only one return line is required, instead of one return line for each LED lamp in series.

The device has the ability to switch LED current between high current and low current, and is suitable for stop lamp and tail lamp applications. These two LED current levels can be set for each output through two reference resistors.

The device includes a temperature monitor, which can reduce the LED driving current when the junction temperature of the integrated circuit (IC) exceeds the temperature threshold. The temperature threshold can be programmed by an external resistor. Ground the TEMP pin to disable the thermal current monitoring function. The junction temperature can be output in the form of analog voltage in the factory program.