Home > Products > Steel Tube > 09CrCuSb Tube
09CrCuSb Tube
- shanghai
- T/T L/C
- 70 days
You May Like
Product Details
Place of Origin | China | Certification | Other, ISO | |
Thickness | 2.2, 15 | Application | Other, Economizers, air preheaters, heat exchangers, condensing coolers, and evaporators serving in high-sulfur flue gas | |
Alloy Or Not | Is Alloy | Section Shape | Round | |
Outer Diameter | 12.7, 177.8 |
Product Description
09CrCuSb (ND steel) steel is a kind of sulfuric acid corrosion-resistant steel that has been tested for a long time and has obtained good results after practical use in many industries. Its good corrosion resistance, various physical and chemical performance indicators, and processing performance can fully meet the Design, manufacture, and use requirements. ND steel, namely 09CrCuSb steel, is the most ideal steel for “sulfuric acid low-temperature dew point corrosion resistance” at home and abroad. At the same time, it belongs to low alloy structural steel.
Chemical Composition (%) of 09CrCuSb Tube
C | Mn | P | S | Si | Cr | Cu | Sb |
≤0.12 | 0.35-0.65 | ≤0.030 | ≤0.020 | 0.20-0.40 | 0.70-1.10 | 0.25-0.45 | 0.04-0.10 |
Mechanical Properties of 09CrCuSb Tube
Nominal Thickness (mm) | ≤8 |
Tensile Strength Rm (MPa) | 390-550 |
Lower Yield Strength ReL (MPa) | ≥245 |
Elongation A (%) | ≥25 |
Corrosion resistance
In the sulfuric acid of medium temperature and concentration, the ND steel is passivated due to dissolution, and a passivation layer rich in alloying elements such as Cu, Cr, and Sb is formed on the surface of the steel, which has high sulfuric acid corrosion resistance.
- Comparison of corrosion rate between ND steel and other steel grades (70°C-50%H2SO4 solution)
Material | Corrosion Speed mg/(cm2h) | Times |
ND | 7.3 | 1 |
A3 | 103.5 | 14.18 |
Cast | 63 | 8.63 |
Cr1A | 13.4 | 1.84 |
321 | 21.7 | 2.97 |
S-TEN | 27.4 | 3.75 |
1Cr18Ni9 | 21.7 | 2.97 |
Corten | 63 | 8.63 |
CRIR (Japon) | 13.40 | 1.84 |
Outside Diameter & Tolerance
Outside Diameter, mm | Tolerance, mm |
3.2≤OD<25.4 | ± 0.10 |
25.4≤OD≤38.1 | ± 0.15 |
38.1 | ± 0.20 |
50.8≤OD<63.5 | ± 0.25 |
63.5≤OD<76.2 | ± 0.30 |
76.2 | ± 0.38 |
Wall Thickness & Tolerance
Outside Diameter, mm | Tolerance, % |
3.2≤OD<38.1 | + 20/- 0 |
38.1≤OD≤76.2 | + 22/- 0 |
Specification:
- Outside Diameter: 12mm-177.8mm
- Wall Thickness: 2.2mm-15mm
- Length: 1000-12000mm, such as 3000mm, 4800mm, 12000mm
- Surface Treatment: Black, painting, transparent oil, etc.
- Heat Treatment: Annealed & Normalized
- Delivery status: The steel pipe is delivered in a normalized heat treatment state
- Keywords: 09CrCuSb, ND Steel, Economizer and air preheater, sulfuric acid resistant low-temperature dew point corrosion steel
Application:
- Economizers, air preheaters, heat exchangers, condensing coolers, and evaporators serving in high-sulfur flue gas; coal-fired boilers, oil-fired boilers; heat exchange, smoke pipes, chimneys of electric furnaces, boilers; acid-resistant and heat-resistant structural parts of baking equipment
- 09CrCuSb steel can also be used with hot-rolled steel plates and steel pipes that are resistant to sulfuric acid dew point corrosion.
Advantages:
- Excellent resistance to sulfuric acid dew point corrosion
- Resistance to chloride ion corrosion
- Low carbon content in steel, and good use effect
- Very high-cost performance
- ND steel has great economic significance, in line with today's high efficiency, longevity, energy saving, Environmental protection, and other "green" concepts and national development policy orientation.
Although ND steel has high corrosion resistance, the use environment of ND steel is quite harsh. The hot side is acidic gas containing SO2 and SO3, and the cold side is low-temperature air or water. Since the rate of steel in different temperatures and concentrations of H2SO4 varies greatly, the corrosion rate is slower at high concentrations, and the corrosion rate increases with the increase in temperature. Especially in the sulfuric acid medium with high temperature and low concentration, its corrosiveness is the largest, so it is required to appropriately increase the medium temperature of the cooling surface as much as possible in the operation of the working conditions. Therefore, the occasions where ND steel is currently used are relatively concentrated (economizers, air pre-heaters, heat exchangers with chloride ions or sulfuric acid media), etc. In addition to acid dew point resistance, ND steel has higher corrosion resistance than 20g in media containing SO42- and Cr.
ND steel needs to be welded with welding wire and ND steel electrode of the same composition. Since the heating furnace, air preheater, and economizer are all manufactured according to the pressure vessel specification, the ND steel electrode used is a low-hydrogen alkaline electrode. At the same time, the surface of the weldment should be cleaned before welding, and the welding wire or electrode should be preheated (150-350°C/h), with a small current and slow cooling. ND steel is welded with electrodes with a diameter of 2.5mm and a diameter of 3mm. The results show that the welding process is simple, the welding surface is smooth, and the slag is easy to remove. 100% X-ray inspection of the butt welded joints is all qualified. The welds welded by the electrode have good resistance to sulfuric acid dew point corrosion.
Tags: 09CrCuSb tube, ND steel tube, China, suppliers, manufacturers, price
Contact Us
- Shanghai T.S. Industrial Co., Ltd
- Contact nameEstela Chat Now
Product Categories
Finned Tube | Tube Sheet | U bend Tube | Steel Tube |
Aluminium Products | Stainless Steel Products | Copper Nickel Products | Titanium Products |
New Products
-
5086 Aluminum Flange
-
M Type Fin Tube | Medium-Finned Tube
-
WO Type Fin Tube | Welded On Solid Finned Tube
-
HFW Solid Finned Tube, High Frequency Welded Solid Finned
-
I Type Fin Tube | Tension Wound Finned Tube
-
Laser Welding Finned Tube | Laser Welded Stainless Fin Tube
-
L, LL, KL Type Fin Tube | DL Fin Tube
-
G Type Fin Tube | Embedded Finned Tube
-
S Type Fin Tube | Square Finned Tube
-
Embedded Finned Tube | G Type Fin Tubes
-
WOS Type Fin Tube | Welded On Serrated Finned Tube
-
LFW Type Fin Tube | Longitudinal Finned Tube
-
HY Type Fin Tube | Extruded Finned Tube
-
HYS Type Fin Tube | Extruded Serrated Finned Tube
-
KL Type Finned Tube, Knurled Finned Tubes
-
Spiral Wound Finned Tube|Galvanized Finned Tube | Hot dip galvanized cold wound finned tube
-
LL Finned Tube , Overlapped L Type Fin Tube
-
N Type Fin Tube | Low Finned Tube
-
Three-dimensional ribbed tube, 3-D Finned Tube
-
Extruded Fin Tube, Extruded Fin Tube, Aluminum Finned Tubes
-
H Finned Tube; Square Finned Tube
-
Rectangular Finned Tubes, Double H Fin Tubes, Square Fin Pipe,
-
Inner finned tube; Internally finned tube
-
High Flux Tube, High Flux Tubes, High Flux Heat Exchange Tube
Popular Searches
- copper tube
- copper ingot
- copper clad aluminum
- non-ferrous metal
- copper alloy
- hpmc
- micro fiber
- heater tube
- portland cement
- rapid hardening cement
- hydroxypropyl methyl cellulose
- copper coil
- copper sheet
- copper rod
- brass rod
- brass copper
- copper pipe
- copper cathode
- copper round bar
- brass bar
- copper flat bar
- copper rod bar
- brass round bar
- copper plate
- brass ingot
- copper tubing
- copper bar
- pancake coil
- copper heat pipe
- straight copper pipe
Recommended Products
- Welded Stainless Steel Pipes/Tubes/Welded Stainless Steel Pipes/Tubes En10217-7 En10216-5en10305-1
- Welded Stainless Steel Pipes/Tube/Japanese Standard: JIS
- HR31603 High-Pressure Hydrogen Pipeline Material/EP/BA Stainless Steel Tubes/Pipes
- Large diameter thick-walled TPEP anti-corrosion steel pipe/inner epoxy outer 3PE/tap water conveying
- Baotou Steel Sour Service X60 X52 Seamless Pipes
- Baotou Steel Seamless Pipes
- Seamless Pipe, SMLS Pipe - ASTM A106 - Carbon Steel Pipe Manufacturer
- SSAW PIPE - Spiral Submerged Arc Welded Pipe - Carbon Steel Pipe Manufacturer
- LSAW PIPE - Longitudinal Surface Submerged Arc Welded Pipe - Carbon Steel Pipe Manufacturer
- Fire Sprinkler Pipe - FM Approval, UL Listed - ASTM A53, ASTM A135, ASTM A795
- Piling Pipe, Pipe Piles - ASTM A252, Carbon Steel Pipe Manufacturer
- Boiler Tubes - ASTM A106 - Carbon Steel Pipe Manufacturer
Find Similar Products By Category
- Metallurgy, Mineral & Energy > Steel & Products > Steel Pipe & Tube

Product Tags:
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Estela
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.

- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile