tarpaulin tent hot air welding

Hot sale Fabric banner Welding Joining Machine

Our company produce many different model welding machine , such as model 4000L , model 3000A , model 4000Z and other high quality model

Welding and joining separate pieces made of  some hot melting materials . Such as PVC fabic , PE canvas , outdoor poster banner , textile , plastic pieces , and so on .

Technical Parameter

Operation steps

1.Check the welding nozzle basic setting , and connect the tool to the mains . The mains voltage must correspond with the voltage stated on the cool .

2.Perform a test welding according to the welding instructions of the material , check the test welding . Then adapt the welding temperature as required .

3.Turn hot air blower using positioning lever up to the stop , the outside edge of drive/pressure roller must lone up with the overlap edge of the material to be welded

4.Set temperature and welding speed according to the required value

5.After completing welding work , press the button STANDBY , so that the hot air blower cools down . Then turn off the air blower switch