Water Cooling Tower Fill Media/ Spinder PVC Cooling Tower Packing

The function of the filler in the cooling tower is to increase the heat dissipation, prolong the residence time of the cooling water, increase the heat exchange area, and increase the heat exchange. Evenly distribute the water. Not stuffing something into a tower that needs to be cooled. A cooling tower is a device that cools hot fluids (including water) to a reasonable temperature. The waste heat generated in industrial production or refrigeration process is generally conducted with cooling water. The function of the cooling tower is to exchange the cooling water with the waste heat with the air in the tower, so that the waste heat is transferred to the air and dissipated into the atmosphere. Application scope of cooling tower: air conditioning cooling system, refrigeration series, electric furnace, injection molding, tanning, power generation, steam turbine, aluminum profile processing, air compressor, industrial water cooling and other fields.

The hexagonal honeycomb packing produced has two forms: inclined tube and straight tube. There are two kinds of materials: polypropylene and glass fiber reinforced plastic.

The inclined tube is mainly used for various precipitation and sand removal. It is the most widely used in water supply and drainage projects in the past ten years and has become a water treatment device. It has the advantages of wide application range, high processing effect and small footprint. It is suitable for water inlet sand removal, general industrial and domestic water precipitation, sewage precipitation, oil separation and tail tension concentration, etc. It is suitable for both new construction and renovation of existing old tanks, and can achieve good economic benefits.

Main features of PVC honeycomb cooling tower fill:

1. The wet circumference is large and the hydraulic radius is small.

2. The laminar flow state is good, and the particle settlement is not disturbed by turbulent flow.

3. When the length of the inclined pipe is 1 meter, the effective load is designed according to 3-5 tons/m2·hour. The VO is controlled within the range of 2.5-3.0 mm/s, and the quality of the effluent is the best.

4. The processing capacity of the inclined tube sedimentation tank is 3-5 times that of the advective sedimentation tank, and the processing capacity of the accelerated clarifier and the pulse clarifier is 2 times.