Home > Products > Servo driver > Leadshine 57 Stepper Motor Driver Kit
Leadshine 57 Stepper Motor Driver Kit
Negotiable
1 (Min.Order)
- T/T Credit Card
You May Like
-
Leadshine M542C 57CM13 57CM23 57CM26 D57CM31 57 Stepper Motor Driver Kit
-
2HSS86H+86J18156EC-1000 Jiemeikang 12NM 86 closed loop stepper motor driver package
-
YAKOTEC 86 stepper motor suit + 2D68MH
-
Japan Shinano stepper motor set 59D5026 DC 42/57/60 stepper motor motor driver control board
-
Japan Shinano stepper motor set motor driver control board 59D5026 DC 42/57 stepper motor
-
Attractive price AC servo motor driver set 750W can be equipped with control system and reducer with encoder
Product Description
Product Description
Specification
Step angle | 2-phase 1.8 ° |
Frame No | 57 |
Torque | 0.6 ~ 3.1 NM |
Temperature rise | 85K Max |
Ambient temperature: | - 10% C ~ + 50 ° C |
Withstand voltage | 500VAC |
Motor model | Body length MM | Static moment N.M | Rated current | Resistance / phase Ω | Inductance / phase mH | rotor inertia g.cm2 |
57CM06 | 41 | 0.6 | 3A | 0.7 | 1.4 | 120 |
57CM13 | 56 | 1.3 | 4A | 0.42 | 1.6 | 300 |
57CM13-0-I8 | 56 | 1.3 | 4A | 0.44 | 1.7 | 300 |
57CM23 | 76 | 2.3 | 5A | 0.38 | 1.75 | 480 |
57CM26 | 84 | 2.6 | 5A | 0.44 | 2 | 520 |
D57CM21 | 67 | 2.1 | 6A | 0.21 | 0.75 | 570 |
D57CM31 | 88 | 3.1 | 6A | 0.26 | 1.18 | 840 |
Motor model | Fuselage length L | Shaft diameter D | Bond height F |
57CM06 | 41 | 6.35 | 5.8 |
57CM13 | 56 | 6.35 | 5.8 |
57CM13-0-I8 | 56 | 8 | 7.5 |
57CM23 | 76 | 8 | 7.5 |
57CM26 | 84 | 8 | 7.5 |
D57CM21 | 67 | 8 | 7.5 |
D57CM31 | 88 | 8 | 7.5 |
Short frequency Curve Chart
Driver Parameter description
M542C
● new 32-bit DSP Technology |
● ultra low vibration and noise |
● built in high subdivision |
● power on automatic setting function |
● precise current control greatly reduces motor heating |
● the current will be automatically halved at standstill, and SW4 is selected |
● it can drive 4,6,8-wire two-phase stepping motor |
● optically isolated differential signal input |
● impulse response frequency up to 200kHz (higher can be changed) |
● the current setting is convenient and can be arbitrarily selected between 0.7130a (effective value) |
● 4-digit dial code, adjustable 15 gear subdivision (1 gear reserved) |
● it has overvoltage, short circuit and other protection functions |
Electrical index | ||||||||
minimum value | Typical value | Maximum | Company | |||||
Output current (peak) | 1.0 | - | 4.2 | A | ||||
Input power supply voltage | 20VDC | 24/36VDC | 50VDC | V | ||||
Control signal input current | 7 | 10 | 10 | mA | ||||
Step pulse frequency | 0 | - | - | KHz | ||||
insulation resistance | 100 | MG | ||||||
Operating environment and parameters | ||
Cooling mode | Natural cooling or forced air cooling | |
occasion | It shall not be placed next to other heating equipment. It shall avoid powder oil mist, corrosive gas, combustible gas and conductive dust in places with too high humidity and strong vibration; | |
Temperature | 0-50℃ | |
humidity | 40-90%RH | |
Vibration | 10 ~ 55Hz / 0.15mm | |
Storage temperature | 20 ℃ ~ 65 ℃ | |
weight | 230 G | |
Packing & Delivery
FAQ
Q: Do you support customized manufacturing?
A: Yes,we can customized manufacturing according to customer's requirment. We support to OEM your own company display interface and logo.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to
quantity.10-20 days if customized manufacturing.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample with sample price.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=1000USD, 70% T/T in advance ,balance before shippment. If you have another question, pls feel free to contact us as below
A: Yes,we can customized manufacturing according to customer's requirment. We support to OEM your own company display interface and logo.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to
quantity.10-20 days if customized manufacturing.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample with sample price.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=1000USD, 70% T/T in advance ,balance before shippment. If you have another question, pls feel free to contact us as below
Contact Us
- Shenzhen Denver Servo Technology Co., Ltd.
Product Categories
New Products
-
Attractive price AC servo motor driver set 400W can be equipped with control system and reducer with encoder 3000 rpm 1.27N.m
-
Attractive price AC servo motor driver set 400W 3000 rpm 1.27N.m can be equipped with control system and reducer with encoder
-
Attractive price AC servo motor driver set can be equipped with control system and reducer with encoder 400W
-
Attractive price AC servo motor driver set 750W 3000rpm 2.4N.m can be equipped with control system and reducer with encoder
-
Attractive price AC servo motor driver set can be equipped with control system and reducer with encoder 750W 3000rpm 2.4N.m
-
XBD-1020 10mm brushless motor precision high torque DC micro motor 12V Totally Enclosed intelligent electric motor
-
35mm hollow cup DC brush reducing motor has high precision, high durability and long service life
-
16mm New design electric machinery 10000rpm hollow cup motor
-
1000-10000rpm 20mA Supply 40mm hollow cup motor, XBD-4070 40 * 70 DC brush hollow cup reduction motor, large torque motor
-
New DC brush hollow cup motor 13 * 31mm high performance, high endurance and high speed electrical equipment
-
Brushless DC 10000rpm xbd-20*22 Torque micro diameter 20mm brush Hollow Cup hollow cup motor
-
Engraving machine accessories Changsheng brand air-cooled square spindle motor 4.5kw/er32 with 4 ceramic bearings
-
Changsheng engraving machine circular air-cooled spindle motor 65 diameter 0.8kw/220v (4 bearings) Changsheng spindle
-
Engraving machine spindle motor Tinghu 125mm diameter 5.5kW mold motorized spindle er32 water-cooled spindle motor
-
Engraving machine accessories Changsheng 80mm circular air-cooled spindle motor 2.2kW Changsheng spindle ER20 / 220V
-
Engraving machine accessories Changsheng brand air-cooled square spindle motor 4.5kw/er32
-
new type Engraving machine accessories Changsheng brand air-cooled square spindle motor output power spindle motor
-
Factory Wholesale Water Through Hole Drilling And Tapping Machine For Composite Materials
-
Top Selling High Speed LPC Milling Tool Drilling And Tapping Machine Magazine With Row
-
Chinese Supplier Machines Nail Drill Well Multispindl Head Milling Drilling And Tapping Machine
-
Chinese Manufacturer Water Jet Cutting Cooling System Through Hole Drilling Tapping And Milling Machine
-
China Wholesale Drilling Numerically Controlled Tool Drilling And Tapping Machine For Carving
-
5-axis teaching machine V300 Small CNC center 5-axis CNC center
-
Small vertical teaching machining center VMC200 small CNC center
Popular Searches
- m542 stepper motor driver
- a4988 stepper driver
- Ac Motor Driver
- ac motor drivers
- mc mini
- servo motor driver controler
- stepper motor driver tb6560
- cnc breakout board
- tb6560 stepper motor driver
- axis positioning
- bipolar stepper controller
- breakout board cnc
- unipolar stepper driver
- Cnc Motor Driver
- cnc step motor controler
- dc drive controller
- linear motor driver
- microstepping motor driver
- microstepping driver
- motor driver tb6560
- stepping drivers controler
- servo spindle drive
- spindle motor driver
- unipolar stepper motor driver
- microstep stepper driver
- 2 phase driver
Recommended Products
- Supply S7-400 series PLC central processing unit CPU module
- Sales and maintenance of STOBER servo controller SDS5008A/L, with a power of 0.75 kW and a rated current of 2.2 A
- In-stock FDS5150A/L 15KW and FDS5220A/L 22KW STOBER servo controllers
- In-stock FDS5075A/L 7.5KW and FDS5110A/L 11KW STOBER servo controllers
- In-stock FDS5040A/L 4KW and FDS5015A/L 1.5KW STOBER servo controllers
- In-stock SDS5075A/L 7.5KW and SDS5110A/L 11KW STOBER servo controllers
- In-stock STOBER servo controllers SDS5040A/L 4KW and SDS5150A/L 15KW
- In-stock STOBER servo controllers MDS5110A/L 11KW and SDS5015A/L 1.5KW
- In-stock STOBER servo controllers MDS5040A/L 7.5KW and MDS5150A/L 1.5KW
- In-stock STOBER servo controllers MDS5075A/L 7.5KW and MDS5015A/L 1.5KW
- Siemens
- Siemens 3RW50552AB05 3RW50552AB14 3RW50552AB15 3RW50552TB04 3RW50556AB04 3RW50556AB05 3RW50556AB14
Find Similar Products By Category
- Electrical & Electronics > Variable-Frequency Drive
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Shenzhen Denver Servo Technology Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile