ASTM D1122 Density of Engine Coolants Tester

Density of Engine Coolants Tester    ASTM D1122

Product model: JF0068

Product Introduction

The instrument is developed in combination with the national standards and the standards of the American Association for Testing Materials. It uses a density meter to measure the density or relative density of engine coolant and its concentrate. The instrument adopts a split structure, which is easy to operate and greatly improves work efficiency.

Technical Parameter

1. Applicable standard: ASTM D1122 SH/T0068

2. Digital temperature control: 20℃±0.2℃

3. Refrigeration method: compressor refrigeration

4. Heating method: electric heating tube heating

5. Stirring method: motor stirring

6. Sampling unit: double hole

7. Working power supply: AC220V/50Hz

8. Power of the whole machine: 1600W

9. Instrument size: 370*520*630mm

10. Net weight: 36KG

Performance Characteristics

1. The glass cylinder is transparent for observation, easy to operate;

2. Fully enclosed compressor refrigeration;

3. The cooling medium is circulated by a noiseless circulating pump;

4. Stainless steel electric heater;

5. Split structure, easy to move;

6. There is a hole for adding refrigeration medium above the cold bath, if the medium is lost, it can be added at any time;

7. Omron PID thermostat, digital display temperature, accuracy 0.1℃

8. Overheating safety protection (with a low water level alarm in the water bath) with an automatic water level regulator in the water bath;

9. It is very convenient to contact the control box;