3L 4L 5L water bottle filling bottling machine for plastic pure water production line

Washing Part:

The grippers take the bottles from the inlet star-wheel while they are still driven by the star-wheel, thus guaranteeing a safe grip. 
After the gripping, the bottle is turned upside down with 180 degree and cantred above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again

Filling Part:

Long tube filling type with 2 times filling process to make sure perfect filling level 

Liquid tank, filling valves, controlling rings, upgrading cylinder.
High speed and mass flow filling valve ensures the high filling speed and exact fluid level. Parts contacting liquid are all made of excellent stainless steel or food grade engineering plastic. 

Capping Part: 

Rotative capping turret, suitable to the application of screw plastic caps on PET bottles 
The fixed part consists of the cap hopper, the cap feeder with relevant motor and the cam actuating the capping heads. 
The heads are raised and lowered by the action of a follower that is riding on a shaped cam.

Conveyor System:

Conveying path support on the ground by tripod, driving motor adopt frequency control, it connects with washing filling and capping 3 in 1 machine and keeps pace with it. The filled bottles are conveyed by the conveyor system. Driving system is running by a main motor that adopts gear drive mode.

Air Conveyor:

Air Conveyor is mainly used in the automatic filling production line of PET bottle beverage or water. It is the intermediate transportation of connecting blowing machine, unstacking machine, bottle storage conveying table and filling machine.

RO System:

Besides Water filling machine, this RO system is very important in the whole water project, we prefer you supply water analysis report from your local inspection department.

This RO system we can make to match up with your water filling machine from capacity from 500L/Hr to 50000L/hr.

Blow Molding Machine:

1. Semiautomatic Blowing Machine for 500BPH-2000bph from  3-10L bottle  with 2 or 4 cavities.

2.Full automatic blowing machine from 2 cavity, 4 cavity, 6 cavity, 8 cavity, 9 cavity,etc from 2500BPH to 12000BPH for 5000ml bottle.

Automatic self adhesive labeling machine

Instructions: it can independent work or connect to the conveyor

Bottle type: glass bottle, plastic bottle and so on, circle, square figure or taper

Alarm function: There is no colorful belt warning label, lack of label, and broken label warming

Bottle diameter: 10-120mm Height: 25-400mm

L type PE film shrink packing machine

Pang Flow: Feeding→ pushing bottles→ film covering and sealing→ shrinking→ cooling

Speed: 8-12packages/min

Power (rated/real): 26kw / 16kw

Max. packing size: 420*300*350mm(LxWxH)

Max. sealing size: 650mm