High end glass bottle mineral water filling machine production plant

Power of main motor

(kw)

8-8-3

1500-2000

2050*1450*2100

2000

14-12-5

3000-4000

2400*1760*2350

2500

16-12-6

5000-6000

2300*1600*2400

2800

18-18-6

7000-8000

2650*1900*2400

3000

24-24-8

8000-10000

2900*2100*2400

3500

32-32-10

12500-15000

3100*2100*2650

4300

40-40-10

15000-18000

4350*2880*3200

6000

50-50-12

20000-23000

4850*3800*3200

7500

Transmission:

Adopt screw feeding bottles, different bottle diameter with different feeding bottle screw.

Main transmission adopting frequency conversion motor will be sent to decelerate box through stair belt, and then lead the whole machine running.

The bottles sent by enter bottle conveyor belt will divided into a fixed interval of one-way,and the bottle inverted by enter bottle clamp, then the bottles can be sent to filling machine’s enter bottle star-wheel. The bottle by lift-up motion is fixed on the bottom of filling parts.

Rinsing Part:

Rotary rinser is one of the key components, which is installed on the clamp, media distributor and other components. When the figure of the rotary bearing rotation, driven turret and the other components are installed on the rotating simultaneously, slewing bearing lubrication in order to concentrate lubrication.

Filling valve:

 Long tube filling type with 2 times filling process to make sure perfect filling level 

Liquid tank, filling valves, controlling rings, upgrading cylinder.
High speed and mass flow filling valve ensures the high filling speed and exact fluid level. Parts contacting liquid are all made of excellent stainless steel or food grade engineering plastic. 

Capping Part:

The capper is made up of hopper, slide way, upper capper, lower capper, rise and fall parts, and preventing turning upright stanchion.

The requirements of aluminum cap:

Only when the height and diameter all accord with crown cap’s standard, the capper’s normal running can be guaranteed. The crown cap should be stored in the dry room.