EAC cooling tower XF crossflow cooling tower Spiral Target nozzle

EAC cooling tower XF crossflow cooling tower Spiral Target nozzle

Cooling Tower Spray Nozzle Supplier

The Spiral Target nozzle is an injection molded polypropylene unit consisting of two parts—the main body with integral target diffuser and a snap-on insert or orifice cap.
The orifice cap is available in 13 diameters ranging from .362 through 1.099. This amount of flexibility allows for a wide range of adjustment in water flow rates and basin water levels.
The Spiral Target nozzle is available in three lengths. The 2.625 nozzle is used on wood, steel, and fiberglass cooling towers where basin support structure does not obstruct the release of water. The 4.875 nozzle is used on larger industrial wood and concrete cooling towers and on applications where clogging might be a concern. The 6.875 nozzle is used on towers where the release of the water has to clear obstructions within the tower structure. In every application the target portion of the nozzle should be located at the correct distance above the top of the cooling tower

fill to obtain maximum water distribution over the fill area.

The XF nozzles offers two types of distribution systems for use on cooling towers, closed circuit fluid coolers and evaporative condensers to optimize performance : Pressurized and gravity-feed, both type of fistribution systems use large orifice non-clogging nozzle to ensure effective wetting of the heat transfer surface.

The XF nozzle are desinged for optimum coverage of either the fill or coil surface . Optimum coverage increases thermal efficiency while fully wetting the surface, this in turn prevents scale build-up that will lessen the unit capacity . there are several designs for pressurized and gravity-feed systems, each fully optimized for the application. Regardless of design, nozzles are easily removed ,either to accommodate new flow rates or to replace broken nozzles.

A: We are factory.

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below: