Aluminum label embossing impressing and die cutting machine ( die cutter)

 1. Adopt four column structure, the vertical precision of the movable plate is controlled by four precision guide bushings, and the parallel precision of any point between the lower working face and the upper working face is below 0.08mm.

2.Adopting adjustable positioning cylinder, the positioning accuracy of the lower dead point is high, the repetition accuracy is below 0.01mm, and the depth of imprint is 100% guaranteed.

3.PLC control system, can have three working modes, automatic, manual and stroke, manual can be pressed on the die stop in any range of travel, equipped with emergency back button, can also be equipped with infrared hand guard device spindle down speed is 88MM/S.

4.The pressure, pressing stroke, holding pressure time and closing height can be adjusted by you for easy operation.

5.  Feeding -- embossing  -- laminating -- die cutting -- sheeting

PLC                  1Set   Made in Japan Mitsubishi       

Touch Screen                1Set    Made in Taiwan

Photoelectric Safety                4Set    Made in Taiwan   

Main machine hydraulic cylinder       2 set    Dapeng Machinery own

Servo Motor              1set   Made in Taiwan Mitsubishi      

Automatic unwinding machine    1set width 320MM  air shaft   400W DC Motor

Movable cutting table     1Set  Knife width 360mm

Laminating roller 320mm  1set  Dapeng Machinery own 

Unwinding roller ( with tension control )  Dapeng Machinery own

Pulling roller  1set   Servo motor transmission