DS215TCQAG1BZZ01A GE Control module card DCS industrial control spare parts

DS215TCQAG1BZZ01A GE Control module card DCS industrial control spare parts

DS215TCQAG1BZZ01A GE Control module card DCS industrial control spare parts

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE

The default setting is a normal voltage ramp but it

is possible to select torque ramp. With the torque

control function it is possible to start and stop

motors with a more linear acceleration than when

using the normal voltage ramps.

During start this can be used to reduce the wear on the equipment

driven by the motor.

During stop, controlling the torque is especially useful for pump applications where voltage ramps can lead to a sudden torque drop which may

result in water hammering and pressure surges. Torque control will keep

these problems to an absolute minimum.

Torque limit

With the torque limit function enabled, the torque can never exceed a

set value during start. This will minimize stress and wear on the equipment driven by the motor.

Analog output

With the PST(B) softstarter it is possible to have analog output signals to

be used as input to a PLC or an analog meter. The output signals can

be selected to be for instance the current of the motor, main voltage,

active power or the temperature of the motor. The terminals used for

analog output are also used for PTC protection, so only one of these

functions can be used.