EN ISO 20344 Safety Shoes Impact Tester

FOB Price

Negotiable

1 (Min.Order)

Supply Ability 1000 per Month
Payment TermsT/T Credit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Description

HY7610-II Safety Shoes Impact Tester in line with “national standard”, steel head of safety shoes placed in the bottom of machines red-edge, heavy hammer at a certain height free fall to impact, then check the degree of subsidence, the weight of heavy hammer is 23 ± 0.2kg . The sample fixed on the device, adjust the height of heavy hammer. Then make heavy hammer free-fall to impact test. After the test, remove the rubber to measure its size, the value ≥ 15mm is OK .

Standard

EN ISO 20344	AS/NZS 2210.1	GB/T 20991
CAN/CSA

Note: This Safety Shoes Impact Tester can conform to but not limit to all the standards above, for more standards conformance, please contact us.

Specification

Model	HY7610-II Safety Shoes Impact Tester
Hammer	23KG (metal header) / 5KG (not metal header)
Impact of edge	90°(R )3mm or other
Impact energy	(EN) 200J, (ANSI) 100±2J
Horsepower	HDC1/4HP
Flexing grips	12 sets
Height of fall	Not less than 1200mm
Net weight	190KG
Volume	75×85×163cm

Contact Us

Anytester (hefei) Co., Ltd.

*Email
Please enter Your valid email address.
*To

Anytester (hefei) Co., Ltd.
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Lab Spinning & Weaving	Ungrouped	Top Sale Products	Textile Tester
Rubber Tester	Precision Air Conditoner	Plastic Tester	Mask Testing Machine
Leather & Shoes Tester	Analysis Instrument	Knittting Machine	Geotextile tester
General	Furniture Tester	Fire Testing	ceramic tester
Carpet Tester

EN ISO 20344 Safety Shoes Impact Tester

You May Like

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category