SPASI23 Embedded card communication of ABB distributed control system

SPASI23 Embedded card communication of ABB distributed control system

SPASI23 Embedded card communication of ABB distributed control system

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE

This chapter contains guidelines on how testing and verification can be divided into

sub tests performed during different phases of a project.

For planning and execution of regression testing after modifications, see the chapter

Modification Testing on page 115.

Source Code Report

The source code report shows the complete source code for the current project in the

Control Builder M Professional. Independent of what editor is used to create the

code, the report is presented in “xml” format.

The report shall be used to verify that the intended functionality is realized in the

application code.

The source code report can be presented at any stage of the project, or during online

operation of the system.

If a printed/saved Source Code Report is needed, this can be obtained from the

menu: Remote System>Show Downloaded Items>Source Code Report.

For more details about the source code report, refer to the user manual System

800xA Control 5.1 AC 800M Configuration, 3BSE035980* page 39.

Difference Report

The difference report is generated after compilation and is presented before

download to the AC 800M HI. The format and data is equal to that of the source

code report, but only source code (and differences) for changed Applications and

Controller Configurations is displayed. E.g. if the project contains two Applications

App1 and App2, and only App1 has been changed since last download, only source

code for App1 will be displayed.

When a download is performed, the difference report will be saved for future

reference.

For more details about the difference report, refer to the user manual System 800xA

Control 5.1 AC 800M Configuration, 3BSE035980* page 39.