Module spare parts 1C31129G03

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules / cards, controllers, touch screens, servo drivers.

Advantages: supply of imported original products, professional production parts,

Fast delivery, accurate delivery time,

The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

2. Select START VENTILATION > Continue. 3. Use the quick key to set FiO2 to 50%. ? Ventilator FiO2 alarms are not active until 60 seconds after an FiO2 change. 4. Select Alarm Setup and set the FiO2 low alarm limit to 30 and the FiO2 high alarm limit to 40. ? Verify the high priority FiO2 high priority alarm sounds. ? Verify the FiO2 high alarm shows with a red background in the alarm bar. ? Verify the display unit alarm light flashes red. 5. Select Alarm Setup and set the FiO2 low alarm limit to 44 and the FiO2 high alarm limit to 56. ? Verify the FiO2 high alarm no longer sounds. ? Verify the FiO2 high alarm shows with a grey background in the alarm bar. ? Verify the display unit alarm light no longer flashes. Low EtO2 alarm test This test requires an installed and warmed-up airway module with O2 monitoring capabilities. 1. Set the vent mode to A/C VC. 2. Select START VENTILATION > Continue. 3. Use the quick key to set FiO2 to 50%. ? Module EtO2 alarms are not active until 90 seconds after an FiO2 change. 4. Select Alarm Setup and set the EtO2 high alarm limit to 70 and the EtO2 low alarm limit to 60. ? Verify the medium priority EtO2 low alarm sounds. ? Verify the EtO2 low alarm shows with yellow background in the alarm bar. ? Verify the display unit alarm light flashes yellow. 5. Select Alarm Setup and set the EtO2 high and low limits to Off. ? Verify the EtO2 low alarm no longer sounds. ? Verify the EtO2 low alarm shows with a grey background in the alarm bar. ? Verify the display unit alarm light no longer flashes. 8 Alarms and troubleshooting 2065490-001 8-29 High EtO2 alarm test This test requires an installed and warmed-up airway module with O2 monitoring capabilities. 1. Set the vent mode to A/C VC. 2. Select START VENTILATION. ? Module EtO2 alarms are not active until 90 seconds after a FiO2 change. 3. Use the quick key to set FiO2 to 50%. 4. Select Alarm Setup and set the EtO2 low alarm limit to 30 and the ETO2 high alarm limit to 40. ? Verify the medium priority EtO2 high alarm sounds. ? Verify the EtO2 high alarm shows with a yellow background in the alarm bar. ? Verify the display unit alarm light flashes yellow. 5. Select Alarm Setup and set the EtO2 low and EtO2 high alarm limits to Off. ? Verify the EtO2 high alarm no longer sounds. ? Verify the EtO2 high alarm shows with a grey background in the alarm bar. ? Verify the display unit alarm light no longer flashes. Low EtCO2 alarm test This test requires an installed and warmed-up airway module with CO2 monitoring capabilities. 1. Set the vent mode to A/C VC. 2. Select START VENTILATION > Continue. 3. Add CO2 into the inspiratory limb to get an EtCO2 value between 5% and 10%. 4. Select Alarm Setup and set the EtCO2 low alarm limit to 12 and the EtCO2 high alarm limit to 15. ? Verify the high priority EtCO2 low alarm sounds. ? Verify the EtCO2 low alarm shows with a red background in the alarm bar. ? Verify the display unit alarm light flashes red