Module spare parts 05704-A-0121

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules / cards, controllers, touch screens, servo drivers.

Advantages: supply of imported original products, professional production parts,

Fast delivery, accurate delivery time,

The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

During A/C VC mode, the ventilator delivers mechanical breaths of the set tidal volume (VT) at intervals based on the set respiratory rate (Rate). The amount of pressure required to deliver the tidal volume depends on the patient’s lung compliance and resistance. Actual ventilation settings may be different if breath timing settings (Timing and Flow) have been changed. In A/C VC mode, assist control is available to synchronize mechanical breaths to the patient’s spontaneous efforts and to allow triggering of additional mechanical breaths. With assist control disabled, the patient can initiate spontaneous breaths at the set PEEP level during the expiratory phase. To set Assist Control, select Current Mode > Mode Settings and select Assist Control. During A/C VC mode, the ventilator calculates an inspiratory flow based on the set tidal volume, inspiratory time, and Tpause. Constant gas flow to the patient is maintained during the inspiratory phase while the airway pressure is below the pressure limit (Plimit) setting. If the Plimit setting is reached, the gas flow is reduced to maintain the Plimit level for the remainder of the inspiratory period. The ventilator monitors delivered tidal volume and adjusts the delivered inspiratory flow as needed to maintain the set tidal volume for subsequent breaths. Tube Comp, Leak Comp, and Trigger Comp may be set if desired. The following settings are available in A/C VC mode: