Module spare parts WOODWARD 9907-164

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules / cards, controllers, touch screens, servo drivers.

Advantages: supply of imported original products, professional production parts,

Fast delivery, accurate delivery time,

The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

patient use. The Aerogen Solo can be used with neonatal, pediatric, and adult patients. The Solo nebulizer operates in-line like the Aerogen Pro, utilizing the ventilator nebulizer menu and nebulizer cable. See "Nebulizer treatment" in the "Procedures" section for additional information. The Aerogen Solo and accessories are disposable and should not be cleaned or reused after single patient use. Assembling the nebulizer Always maintain the nebulizer in a vertical orientation while it is in the patient circuit. This orientation helps prevent patient secretions and condensation from contaminating the aerosol generator of the nebulizer and ensures proper nebulization. 1. Connect the nebulizer to the T-adapter by pushing the nebulizer firmly onto the adapter. AB.98.281 2. Connect the nebulizer and T-adapter into the inspiratory limb of the breathing circuit before the patient wye. AB.98.283 3. Attach the nebulizer cable to the nebulizer connection as shown, matching the red dots. Note WARNING 4 Setup and connections 2065490-001 4-21 AB.98.284 4. Complete a System Check prior to use on a patient. See "System Check" in the "Operation" section for additional information. 5. Follow the "Nebulizer treatment" procedure in the "Procedures" section. Filling the nebulizer To help avoid damage to the nebulizer, do not use a syringe with a needle. Do not push or apply undue pressure to the domed aperture plate in the center of the nebulizer. The maximum capacity of the Pro nebulizer unit is 10 ml. The maximum capacity of the Solo nebulizer is 6 ml. Do not fill the nebulizer beyond the maximum fill indication point. The underside of the filler cap represents the maximum fill indication point. 1. Open the filler cap tab on the nebulizer