ICS TRIPLEX T8451

Brand: ICS TRIPLEX

Type:T8451

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

The PM851A/PM856A/PM860A differ in performance when executing an application program. Using the same application program in PM851A/PM856A and PM860A, the difference in execution time can be expressed as: Execution time in PM851A/PM856A = 2 *Execution time in PM860A Example: If a certain application program has an execution time of 100 ms in PM860A, the same application program will have an execution time of 200 ms in PM851A/PM856A.

PM861/PM861A and TP830 – Processor Unit Key Features ? MPC860 Microprocessor running at 48 MHz. ? 16 MB RAM with internal or external battery back-up facility. ? 12 x S800 I/O units can be connected to the electrical ModuleBus. ? Four on-board communication ports: – CN1 + CN2, Ethernet ports (IEEE 802.3, 10BaseT) – COM3, serial port (RS-232C) with modem support – COM4, serial port (RS-232C) for service tool ? Basic communication is extendable by using additional communication interface units. ? Redundancy Control Link, for use in redundancy configuration. ? Compact Flash interface which supports loading of application and cold retain data storage.

Memory ? 2 MB flash PROM (firmware storage). ? 16 MB of SDRAM. Power Dissipation 6 W typical 11 W typical (incl. full supply to ModuleBus and CEXBus, see Appendix B, Power Consumption). Current Consumption 250 mA typical (430 mA max.) (excl. supply of ModuleBus and CEX-Bus, see Appendix B, Power Consumption). Power Input Connector Four pin, screw connector L+, L–, SA and SB. Power Supply Requirements Inputs designated L+ and L– 24 V nominal, variation between 19.2 V DC and 30 V DC. Redundant Power Supply Status Inputs Inputs designated SA, SB ? Max input voltage 30 V ? Min. input voltage for high level 15 V ? Max input voltage for low level 8 V These inputs are status inputs. The threshold levels are logical “0” or “1” input limits, not power fail limits. Power Reservoir The processor unit has an internal 5ms power reservoir, sufficient for the CPU to make a controlled power down. Protection Rating IP20 according to EN60529, IEC 529.