High Yield Cocoa Bean Oil Extraction Machine|Cocoa Butter Making Machine

Introduction

The cocoa oil press machine is a hydraulic oil extraction equipment with simple operation and high oil yield. It is suitable for continuous work at high temperature and high pressure, with high speed and high pressure. The cocoa oil press is an important equipment in the cocoa processing line.

Advantage

1. Big capacity, high pressure, large volume.

2. Used for both hot press and cold press.

    Base and bodies are fabricated from mild steel and stainless steel.

3. Works quite smoothly, easy maintenance.

4.It can also used for dehydration, de-oiling, off liquid for clay, activated carbon and other chemical raw materials.

5.It is the best choose to use oil press for oil plants.

Operating Instruction:

Step 1: Before running, clean the oil tank, feed enough clean hydraulic oil, check every bolts if they are loose, check circuit if they connect well. Then pre-heating, 50-70oC in summer and autumn, 70-90oC in winter and spring. Finally run 1-2 minutes. When the oil changes thick in winter and spring, then run 5-10 minutes.

Step 2: Exhaust lampblack from the cooked oilseed, put it into the basket, then put the mat and separation board.

Step 3: Lift the hand shank of the manual valve, turn on to press. There must be a person when the main engine boosts. When reaching 55Mpa, it stops.

Step 4: When the pressure drops to 45MPa, the electric controlling system will turn on itself and the pressure will rise back. When there is no oil exuding, then finish the pressing.

Step 5: Turn off, press the hank shank downward to make the squeezing tank away 10mm. Then lift the hand shank and open the top plate.

Step 6: Turn on, oil cake rises to make the top plate tower above 5mm. Then turn off and take out separation board and mats and oil cake.

Step 7: Press the hand shank down, the plunger declines and start to press second time.

Email: shanna@machinehall.com

WhatsApp: 008618503887287