Watercut Meter Suit Wellhead Crude Oil Water Cut Analyzer Online Crude Oil Water Cut Analyzer

developed by our companyALC05wellhead crude oil water cut analyzer adopts an innovative double-pipe structure, and the measuring pipe section and the bypass pipe section are automatically switched. The measurement process consists of the following steps: switching sampling, preliminary measurement and analysis, heating stratification, water content stratification scanning measurement, and calculation of comprehensive water content. At the same time when the liquid flow channel is switched to the bypass pipe section, the medium originally flowing through the measuring pipe section is intercepted and can be set to stand, heated, stratified and scanned for measurement at any set time interval. Due to the creation of a relatively static measurement environment, the stratification time of gas-liquid and impurities is very long, and heating is assisted, so good measurement accuracy can be achieved. In addition to outputting moisture content measurement results, the instrument can even measure the gas-liquid ratio under working conditions.

working power supply:AC220V 50HzorAC380V 50Hz;

operating current ≤5A;

signal output interface:4~20mAcurrent, RS485/MODBUScommunications;

in-place display: liquid crystal display;

electrical connection: signalM20 * 1.5orG3/4internal thread; Power supplyG3/4Internal thread;

measurement range:0% ~ 100%;

measurement accuracy:±3%;

ambient temperature:-40~70℃;

installation location: wellhead/Metering pipeline;

: wellhead/single well oil, water and gas mixed medium;

installation method: pipe section installation, flange connectionDN50PN2.5or customization;

flange material:304stainless steel;

Material:304stainless steel;

liquid receiving material:316Lstainless steel plus polytetrafluoroethylene combination;

design pressure:2.5MPaor customization;

design temperature:0~160℃;

Explosion-proof level:ExdibIICT6 Gb;

Protection level:IP65.

adopts the principle of on-line sampling and non-real-time measurement to realize a relatively static measurement process. Combined with multi-probe measurement technology, it provides a guarantee for high-precision measurement.;

● According to the static time and heating temperature that can be set by the parameters, a good separation effect of gas-liquid, impurities, etc. is ensured, which provides accuracy guarantee for layered scanning measurement;

● It has temperature control function, can set the target temperature, and has a built-in temperature sensor. The instrument can carry out temperature measurement display and temperature compensation for moisture content measurement results without external temperature transmitter;

● According to the requirements of wellhead water cut measurement, the time and number of measurements can be set every day to obtain the water cut measured each time and calculate the comprehensive water cut for one day;

● In addition to displaying and outputting the measurement results, it also has a historical data storage function to store the historical data of the online measurement results;

● Chinese text+The number is displayed in place. Original creation3key non-contact key, which greatly facilitates the operation of explosion-proof and explosion-proof meter;

● Built-in intelligent communication and programming interface, software can be upgraded on site;

● Easy and quick installation, no requirements for front and rear straight pipe sections, and insensitive to convective flow velocity;

● With automatic heating device, the upper limit of heating temperature can be set to facilitate layered measurement.