GZM-30KMS filling machine

Gzm-30kms filling machine is specially developed by Shanghai Guangzhi Instrument Equipment Co., LTD. It is suitable for the working environment of petrochemical, pharmaceutical, food and other enterprises. It adopts the way of filling under liquid level and is suitable for a variety of liquid materials. The unique design of the spray gun device is easy to operate, fast perfusion; And to a large extent to ensure the residual fluid dripping at the end of perfusion. When OPERATING, THE OPERATOR ONLY NEEDS TO SIMPLY ALIGN THE BARREL MOUTH TO THE RIGHT BELOW THE NOZZLE, PRESS THE [START] BUTTON ON THE HANDLE, THE SPRAY GUN WILL automatically INSERT INTO the barrel, and the empty barrel will be automatically peeled. Then open the filling valve, double speed filling; At the end of filling, the spray gun will be LIFTED automatically. The drip plate will be automatically connected to the bottom of the spray gun, and the barrel will be pushed out to the back end of the conveyor manually. Widely used in food processing, pharmaceutical industry production workshop and warehouse management; Production process control of paint and fine chemical raw materials in chemical industry and measurement of finished and semi-finished products; Measurement of materials in manufacturing industry.

The system characteristics

■ Made according to the standard of "QB/T2501-2000 Gravity automatic Charging Weighing Instrument";

■ The contact material part is made of SUS304 stainless steel, with strong anti-corrosion performance;

■ The filling gun is designed for quick free hand disassembly and assembly, easy maintenance;

■ Filling gun front section additional pneumatic ball valve does not fill automatically close, prevent material leakage;

■ The sealing system is made of silica gel with long service life.

■ The table and roller of the scale are made of stainless steel, with good anticorrosion;

■ The filling gun adopts insertion perfusion to avoid the material flying shallower than the barrel and affecting the outer packaging;

■ The system adopts two-stage automatic filling of size material to improve the accuracy;

■ When the filling value of a single bucket arrives, the filling gun will be automatically lifted to wait for the next start;

■ When the filling gun is not inserted into the mouth of the barrel, the filling gun will be lifted automatically and filling will not be performed;

■ When filling, you only need to manually move the barrel to the weighing table, align the gun head and press the start button to perform filling;

In case of emergency, press the emergency stop button to remove the filling;

■ One-button operation: start -- automatic lowering of filling gun -- automatic peeling -- two-speed filling -- completion -- automatic raising of filling gun

The basic parameters

■ Maximum weight: 50kg

Minimum sensing capacity: 10g

■ Filling error: no more than 0.2%

■ Filling speed: about 500-700 b/h (depending on feed flow rate)

■ Power supply: AC220/50Hz(Zhi: YI side of the machine)

■ Air source: 0.6mpa (user-supplied Zhi machine YI side)

■ Service temperature: -10℃-50℃

■ Relative humidity: & LT; 95% (no condensation)

■ Control mode: 2 block control (with reflux control)

■ Filling mode: insert type, liquid surface

■ Scale table size: 300×300mm

■ Nozzle pipe: SUS304 stainless steel and tetrafluoride

■ Pipeline pressure: (0.2-0.6)MPa(related to material properties).

■ Material interface: DN50- flange connector

■ Air source interface: G1/2 internal thread is provided for quick connector connection

■ Foundation condition: solid level concrete floor, concrete thickness should be more than 10cm.

Shanghai Guangzhi Automation Equipment Co., Ltd. is a professional supplier of filling and packaging equipment. Main products: automatic filling machine | | dry mortar packing machine automatic filling machine | ton bag packaging machine, product quality is stable, quality assurance for a year