Home > Products > bearing > Customized JDB bushing inner diameter 32mm series 32*40*35 graphite copper sleeve for forklift
Customized JDB bushing inner diameter 32mm series 32*40*35 graphite copper sleeve for forklift
Negotiable
1 (Min. Order)
- T/T Credit Card
You May Like
-
JDB inner diameter 28mm series 28*32*20 self-lubricating shaft sleeve for automatic equipment
-
JDB inner diameter 40mm series 40*45*40 copper bush Oilless Graphite Bronze Bushing
-
JDB inner diameter 50mm series 50*60*35 graphite oil free bushing for automation equipment
-
JDB inner diameter 110mm series 110*120*60 self-lubricating oiless copper guide bushing
-
JDB inner diameter 80mm series 80*90*120 copper bushing brass bushing graphite bronze bushing
-
JDB inner diameter 18mm series 18*26*30 self lubrication copper sleeve sliding bearing
Product Description
Customized JDB bushing inner diameter 32mm series 32*40*35 graphite copper sleeve for forklift
Product Description
JDB bronze inlaid bearing is a solid lubricating product with 6-6-3W copper as the matrix, embedded with graphite and MoS as the solid lubricant. Due to the higher density of 6-6-3 copper than high-strength brass, it is very wear-resistant in high-temperature and low-load situations. It has been used in fireplace doors, oven runners, rubber machinery, light industry machinery, and machine tool industries. Wait for low load, high temperature and medium speed.
Advantages of bearing
1. The design is flexible, simple and convenient, with a wide range of use:
The mechanical design of the oil supply system is a time-consuming and time-consuming device. The use of solid lubricating bearings does not require the consideration of oiling devices in the design, saving the oiling device equipment. At the same time, it can be designed for various special occasions. Various shapes to meet the needs of various special occasions, the use of solid lubricating bearings can greatly reduce the cost of mechanical maintenance, oil, etc.
2. No oil can be used Since the linear expansion coefficient of the solid lubricant is greater than that of the metal matrix, when the solid lubricating bearing starts to operate, the oil film will be transferred to the abrasive parts to achieve
self-lubrication, so the solid lubricating bearing can be used in places where it is difficult to add oil or oil or grease. , Even
in the case of low speed and high load, it also plays a good role in lubrication.
Advantages of bearing
1. The design is flexible, simple and convenient, with a wide range of use:
The mechanical design of the oil supply system is a time-consuming and time-consuming device. The use of solid lubricating bearings does not require the consideration of oiling devices in the design, saving the oiling device equipment. At the same time, it can be designed for various special occasions. Various shapes to meet the needs of various special occasions, the use of solid lubricating bearings can greatly reduce the cost of mechanical maintenance, oil, etc.
2. No oil can be used Since the linear expansion coefficient of the solid lubricant is greater than that of the metal matrix, when the solid lubricating bearing starts to operate, the oil film will be transferred to the abrasive parts to achieve
self-lubrication, so the solid lubricating bearing can be used in places where it is difficult to add oil or oil or grease. , Even
in the case of low speed and high load, it also plays a good role in lubrication.
Details Images
Recommend Products
Company Profile
Hunan Austan Machinery Co.,Ltd. has more than 10 years exporting experience. Our main products are linear guideway ,ball screw, ball transfer unit, roller chian,sprocket, bearing,universal joint,cross guideway and so on. We are aslo dealing with HIWIN THK INA REXROTH PMI TBI IKO NSK brand. Various products exports more than 80 countries, we can also provide one stop solution, welcome to send enquiry here.
Packing & Delivery
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer.
Q: How long for shipping?
A: Usually 3-5 days if have stock. or 7-10 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free, but you have to pay shipping cost.
Q: What is your terms of payment ?
A: if value less than 2000USD, 100% in advance. if value over 2000usd, 50% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
A: We are manufacturer.
Q: How long for shipping?
A: Usually 3-5 days if have stock. or 7-10 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free, but you have to pay shipping cost.
Q: What is your terms of payment ?
A: if value less than 2000USD, 100% in advance. if value over 2000usd, 50% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
Contact Details
Chris Li
Hunan Austan Machinery Co.,Ltd.
Tel:0086-18268620391 Wechat:lidan1990523
Skype:chrislee20112 Whatsapp:0086-18268620391
Email:chris@ast-machinery.com
Hunan Austan Machinery Co.,Ltd.
Tel:0086-18268620391 Wechat:lidan1990523
Skype:chrislee20112 Whatsapp:0086-18268620391
Email:chris@ast-machinery.com
Contact Us
- Hunan Austan Machinery Co., Ltd.
Product Categories
| ball screw | ball transfer unit | bearing | cross roller guide |
| Door and window hinges | free wheel hub | inkjet printer | linear guideway & linear block |
| motor | roller chain & sprocket | Ungrouped | universal joint |
New Products
-
JDB self-lubricating copper sleeve ID 12mm series 12*15*10 oil-free bushing graphite sleeve bearing
-
Equivalent IGUS 50mm RJUM-01-50 engineering plastic linear bearings LIN-01R-50 linear slide bearing
-
Equivalent IGUS 30mm Engineered Plastic Linear Bearings FJUM-01-30 Round Flanged Linear Bearing
-
Equivalent IGUS 16mm engineering plastic linear bearing FJUM-02-16 square flange self lubricating linear bushing
-
Equivalent IGUS 30mm engineering plastics linear bearing FJUMT-02-30 square flange lengthening slider bearing
-
Engineering plastic linear slider SC16UU self lubricating linear bearing block
-
12mm inner diameter linear block SC12UU with Self lubricating plastic linear bearing
-
Factory supply 30mm innear diamter SC30UU linear block with self lubricating plastic linear bushing
-
Equivalent THK P5 precision RB70045UUC0P5 cylindrical roller cross roller bearing
-
Equivalent KAYDON KA025ARO CSEA025 angular contact ball bearing thin wall bearing
-
Equivalent KAYDON KA040XPO CSXA040 four-point contact thin section ball bearing
-
Equivalent KAYDON thin-walled bearing KA050XPO CSXA050 four-point contact ball bearing
-
CSXG140 four-point contact ball bearing replace KAYDON KG140XPO thin wall bearing
-
CSXG200 four-point contact ball bearing replace KAYDON KG200XPO Industrial robot bearing
-
Equivalent KAYDON KA035CPO CSCA035 thin wall deep groove ball bearing for medical instrument
-
Equivalent KAYDON KA030XPO CSXA030 four-point contact thin-walled ball bearing
-
Replace winkel Inner dimater 50mm 4.059 combined needle roller bearing for door frame lifting system
-
Equivalent winkel inner diamter 60mm 4.061 combined needle track roller bearing
-
Equivalent winkel Inner dimater 40mm 4.057 needle roller combined bearing for forklift
-
Equivalent winkel 45 inner diamter 4.058 MR0025 combined roller forklift bearing
-
Equivalent winkel 40mm inner diameter 4.056 MR0023 combined forklift mast bearing
-
Equivalent winkel inner diameter 35mm 4.455 adjustable type compound roller bearing for forklift mast
-
Equivalent winkel 80mm inner diamter 4.039 composite roller bearings for transmission system
-
Equivalent winkel inner diameter 55mm 4.078 adjustable bracket compound roller bearing
Popular Searches
- oilless bearing
- sintered bronze
- bush bearing
- bronze bearing
- ptfe spacer
- reducing bush
- reducer bushing
- sintered bearing
- pipe fitting reducing bush
- hexagon bushing
- brass male bush
- brass reducing bushing
- brass male bushing
- bearing bush bushing
- flanged plastic bushing
- snap bushing
- brass thread bush
- reducing bushing
- thread bush
- split bearing
- split sleeve bearing
- male bush
- sintered bearing bronze oilless bushing
- plastic conduit bushing
- pe bushing
- king pin bushing
- bimetal bearing
- lubrication bushing
- lubrication plain bushing
- steel threaded bushing
Recommended Products
- Copper sleeve, copper slider, graphite self-lubricating bearing, copper nut
- Spare Parts Sliding Bearing
- Plastic Granulator Accessory Sliding Bearing
- JUM-01 / 02 Sliding Bearing Lined Film Sleeve 10 12 16 20
- Linear Sliding Film Plastic Durable Bearing Parts RJMP Series
- Linear Bearing JUM-01 / 12/16/20/25/30/35/40/50 Fixed Seat
- Slewing Bearing Roller Spacer Roller Spacer R Type
- Custom made large adapter sleeve bearing withdrawal sleeve
- RJUM-01-02-10/12/16/20/25/30/35/40 Plastic Sleeve Sliding Bearing Bushing
- OJUM-01 / 10 12 16 20 25 30 35 40 Aluminum-plastic shell printing press sliding bushing
- Lower shaft sleeve pressure ring of guide vane Generator QFS-125-2 for Turbine generator parts
- Customizable Wear-resistant LG JM5 C83600 Inner Oil Groove Copper Bronze Bushing Sleeve Bearing Bush
Find Similar Products By Category
- Industrial Equipment & Components > Bearing > Plain Bearing
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Hunan Austan Machinery Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile