2U 14/16 slots double power supply media converter chassis rack mount

Nice price double power supply 2U 14/16 Slots Rack mount media converter Chassis

Overview

1. Rack-mounted chassis is a centralized and economical equipment of gathering video/data modules together. 2U Chassis can accommodate a combination of up to 16 pieces of video modules and video/data modules. AC110/220V Switch Mode Power Supply(SMPS) design is employed to make module working independently possible without interference from one power shutdown and other modules' failure within the chassis. High reliability and stability of each module are achieved.

2.The rack is developed for telecom fiber networking project as a matched product. It is applicable to the working environment of high reliability, high capacity, high integration and perfect performance.

3.The rack is stable performance, large capacity of power supply, and ease for management and maintenance. Before using this rack, please read this manual carefully, please install and operate it as following this manual to avoid the damage.

Features

1. 14/16 Slots for Media converters.
2.  Main and vice power equipment ensure system work smoothly.
3.  When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the chassis.
4.  0ne or two air-cooling fans are installed inside to further strengthen the superior performance of the system and eliminate the necessity for periodic maintenance.
5.  All of the modules installed in the chassis are hot swappable.
6.  With stable performance, large capacity of power supply and easy for management and maintenance.
7.  Status information can be read through the LED indicators on the installed modules Support telecommunication operation requirement completely.

Product List

Technical Specifications

Installation

1.   When you unpack this product package, please check the devices with packing list.
2.  Install the 16-slots chassis into a standard 19” cabinet and fix it .
3.   Insert the card type media converter to the guide rails of the slot. Make sure the power plug of card type media converter is inserted in power port of the chassis, then fasten the screws .Follow the above steps, install all necessary converter in the chassis ,then block up any slots not for use temporarily .
4.   If the chassis is with dual power supply, please turn on both two power supply, and they will work together. This will extends the life cycle of the power supply, and can make sure the chassis work normally in case one of them broken down.

Connection Diagram

 Our Strength & Quality Assurance

Shipment

Payment