304L Stainless Steel Strip

304L Stainless Steel Strip

Before 304L stainless steel strip starting up, workers must first check whether the rotating parts of the equipment and electrical parts are safe and reliable. Stacking materials in the work site should be neat, and there should be no obstacles on the passage. Operators must wear work clothes, tie the corners of the cuffs, and wear work caps, gloves, and protective goggles. When driving, it is strictly forbidden to clean, refuel and repair the equipment, nor to clean the work site. It is strictly forbidden to touch the steel belt and rotating parts with your hands when driving.

304L Stainless Steel Strip Specification

Processing Service Of Our 304l Stainless Steel Strip

Cutting+Slitting -304L stainless steel narrow strip, special length/width plate

(1) Flame cutting: The cost of flame cutting equipment is low and it is the only economical and effective means to cut thick metal plates, but it has its shortcomings in thin plate cutting.

(2) Laser cutting：Laser cutting equipment can cut stainless steel plates below 30mm. Adding oxygen to the laser beam can cut 40mm thick carbon steel, but after oxygen cutting, a thin oxide film will be formed on the cutting surface.

(3) Wire cutting: It is developed on the basis of EDM perforation and forming. It has not only developed the application of EDM but also replaced EDM perforation and forming in some aspects.

(4) Shearing cutting：Uses a moving upper blade and a fixed lower blade and uses a reasonable blade gap to apply shearing force to metal plates of various thicknesses so that the plates can be broken and separated according to the required size. Shearing machine is a kind of forging machinery, and its main function is the metal processing industry.

(5) Plasma cutting：It is a processing method that uses the heat of a high-temperature plasma arc to partially or partially melt (and evaporate) the metal at the incision of the workpiece and uses the momentum of the high-speed plasma to remove the molten metal to form an incision.

(6) Slitting: Also known as slitting, refers to the process of uncoiling, slitting, leveling, and winding of stainless steel coils into coils of the required width.

Surface processing - 8K mirror, HL hairline, color coating

Now the price of stainless steel wholesale is affordable, if you want to buy stainless steel sheet, please leave us a message.